Sponsored Links

PS4 News on Facebook! PS4 News on Twitter! PS4 News on YouTube! PS4 News RSS Feed!
Sponsored Links
Sponsored Links
Home PS4 News - Latest PlayStation 4 and PS3 News

WinSkeet 4000 Rev 111002 for ProgSkeet on PS3 is Now Available


Sponsored Links
181w ago - Following up on the QT Flasher for PS3 Test and Localized Versions for the ProgSkeet device, today PlayStation 3 developers uf6667, ago and bmx have made available the Winskeet40000 Rev 111002 software platform for Windows following by official Linux / Windows versions from uf6667.

Download: WinSkeet 4000 Rev 111002 for ProgSkeet PS3 / libusb0.dll / WinSkeet40000 111004 (Official) / Progskeet Flasher QT 20111004 (Official) / YASkeet (Linux Version of Flasher) / iSkeet (Mac OSX Version of Flasher)

Below are the recent changes, to quote:

11xxxx:

  • New Qt GUI implemented
  • Linux and MacOS X support
  • Added predefined and user presets
  • Fixed ability to select invalid ranges
  • Added a file patcher
  • Flasher: Added support for canceling running operations
  • Flasher: Added USB device reset
  • Flasher: Added support for erasing as a stand-alone operation
  • Flasher: Added cycle period selection, should help with longer cables
  • Flasher: Added abort on error option
  • Flasher: Reodered operations, full read, full erase, full write
  • Flasher: Fixed bug with unreliable GPIO operation
  • NOR: Added new write mode "Dual word program"
  • NOR: Added display of total flash size
  • NOR: Fixed flashing of the second half of Samsung K8Q2815UQB and likely other dual chip NORs
  • NOR: Added erase block region configuration
  • NOR: Added selection of number of bytes for buffered write
  • NOR: Added support for Spansion S29GL128N90TFIR2
  • NAND: Made custom ranges work
  • NAND: Added Dual-NAND reading. Reads a block from two NANDs simultaneously, thereby doubling the speed.

Notes:

  • If you're using 16MByte SAMSUNG NOR, please use Sector Size: 4kB/ Sector Count: 4096 and check "alternate writing method".
  • Differential flash, if you haven't noticed yet, will skip unnecessary writes (compares data on chip vs data in file)

Finally, below is GlitchSkeet Rev 111216 via Rogero for those who wish to RGH with ProgSkeet (for XBox 360 users primarily at this time).

Download: GlitchSkeet Rev 111216

To quote: GlitchSkeet: is another bitstream written specifically for the ProgSkeet flasher, which will allow it to operate as a Glitcher like the many Glitch-Chips out there now that are used to perform the Reset Glitch Hack on the XBox 360 console.

The GlitchSkeet Bitstream currently have support for only the "Trinity/Slim" XBox 360 board model, It may need some more tweaking as well as adding support for other XBox 360 board models in later releases as time allows.

But anyway, all Skeeters/ProgSkeet owners have the right to test this Bitstream as it is in its current state.

Compatibility: This Bitstream is compatible with ProgSkeet v1.1 Crystal Blue only, ProgSkeet v1.0 Crystal White won't work.

Preparation: Short R12 and R9, Open R11 and R10

Pinout:

GP5 = I2C_SCL
GP6 = I2C_SDA
Adr0 = CPU_RST (you must add a Capacitor of 220pf/230pf/270pf between Adr0 & Ground)
Adr2 = POST_OUT1
Adr4 = DEBUG PIN / LED

N.B: the Injectus Jtag USB programmer is needed in order to update ProgSkeet with this Bitstream.

Credits to uf6667, Ago, bmx, nice69 and to all ProgSkeet Team members and testers.


WinSkeet 4000 Rev 111002 for ProgSkeet on PS3 is Now Available

Stay tuned for more PS3 Hacks and PS3 CFW news, follow us on Twitter, Facebook and drop by the PS3 Hacks and PS3 Custom Firmware Forums for the latest PlayStation 3 scene and PlayStation 4 scene updates and fresh homebrew PS3 Downloads. Enjoy!

Comments 95

• Please Register at PS4News.com or Login to make comments on Site News articles.
 
#45 - adrianc1982 - 188w ago
adrianc1982's Avatar
I hope we get this method for the fat ps3s, but somehow I doubt it since they have the complete flash in the ps3 and not on the hdd. Correct me if I'm wrong...

But great fo those ps3 slim users because they can go ofw and back to jb mode with a couple of hours of work...

#44 - PS4 News - 188w ago
PS4 News's Avatar
Following up on the initial PS3 Slim 3.70 Downgrade and PS3 3.7x Downgrade for Slims and Fats with NOR Flash news, this weekend Italian PlayStation 3 hackers DiGiTaLAnGeL (linked above) have made available a guide to fast swap PS3 Slim CFW 3.55 to OFW 3.70 with 2 HDDs and ProgSkeet followed by a New Method - PS3 Downgrade v2 Supports all NOR Flash from TwoStone.

To quote, roughly translated: Today I'll write a tutorial to "fast-swap" between CFW 3.55 and OFW 3.70, using 2 HDDs... at the end of the tutorial, you'll be able to swap between the firmware just flashing a dump on your PS3 using Progskeet. (instead of downgrading and losing all data).

The first steps are not so easy, so take your time and go on, by the way, you must have some skill with Progskeet, and it must be 100% working on your console.

What we need:


We need 2 HDD because the NOR flashes stores some parts of the current FW on the HDD so we will need 2 HDDs, one is for 3.55, and one is for 3.70.. We will call those HDD "A" (for 3.70) and "B" (for 3.55) don't mix them up!

Starting with a PS3 Slim with OFW 3.70.

1. Plug in HDD "B", format and prepare it if it's required by the PS3 and you should have your 3.70 up and running.
2. DUMP your actual NOR and call it "original dump 3.70.bin"
3. Now flash your "downgrade.bin" (edited with the personal data found in "original dump 3.70.bin")
4. Turn on your PS3 and be sure that the PS3 is asking you to press the PS button (downgrade.bin flashed correctly )
5. Insert a 3.55 Downgrade dongle and enter factory/service mode.
6. Copy Lv2Diag.self by Jaicrab and the 3.55 NO CHECK UPDATE renamed as "PS3UPDAT.PUP" in the root of your USB Stick.
7. Plug in the USB Stick in the most-right USB port of your PS3 and wait for it to turn OFF.
8. Leave the factory mode using the other Lv2Diag.self
9. After the reboot, you need to configure and set up your system... now you have a fully working 3.55 CFW based on KMEAW "NO CHECK".
10. DUMP your actual NOR and call it "swap dump 3.55.bin"
11. Unplug HDD B and Plug in HDD A.
12. Turn on your PS3, plug in your USB Stick containing official 3.70 update and press start+select when asked.
13. When the PS3 reboots, check that the system is fully working and DUMP your actual NOR and call it "swap dump 3.70.bin".

NOW IT'S OVER! You should have "swap dump 3.55.bin" and "swap dump 3.70.bin" ... Now you just have to swap HDD and flash the corresponding dump:

  • HDD A = swap dump 3.70.bin
  • HDD B = swap dump 3.55.bin

WARNING: Do not install other CFW than the "NO CHECK" one... because it's used to make the "fast-swap" working... if you flash something different you will not be able to go between the 2 FWs. This CFW disable the Syscon checking at the startup... so it will not freeze or complain when the syscon says "3.70″ and your FW is 3.55

In case you wanna update your console with a future "3.80″ or-so firmware. Do not update your console when you are running 3.55 firmware! You have to go to "swap dump 3.70.bin" and then update as usual (XMB or recovery)... By the way, the downgrade is confirmed working only on 3.70... we haven't tested it on other FWs, you could lose the possibility to go back to 3.55!

More PlayStation 3 News...

#43 - elser1 - 188w ago
elser1's Avatar
LOL.. i wish it was my tut mate, but its not... ha

#42 - mushy409 - 188w ago
mushy409's Avatar
I'm still trying elser1's tutorial for 3.6x downgrade with infectus. Any changes I make to the NAND result in YLOD. If I flash the backups back then the console boots normally...

Trying as we speak to flash the 2 x 128Mb modified files and see what happens. Looks like Differential Flashing is a no-go for this. I've tried a few times and it YLOD's my PS3.

#41 - dayv - 188w ago
dayv's Avatar
been stuck on 3.61 since May. Waiting for CFW or downgrade. but this tutorial is not easy to understand.

#40 - NTA - 188w ago
NTA's Avatar
Ah, I"ll keep this in mind for when I need to update the PS3. Hoping some easier tutorial might come along but until then i'll just have to stick with this...

#39 - oVERSoLDiER - 188w ago
oVERSoLDiER's Avatar
Very nice tutorial. Pitty I only have a few AT64 and no Teensy++ (which is now available at PJRC). I would wait for an more exact tutorial to risk my only one 3.55 on this, but maybe people how already has upgraded their previous 3.55 to 3.70 would try this.

#38 - Natepig - 188w ago
Natepig's Avatar
Great stuff but looks a bit heavy.

#37 - elser1 - 188w ago
elser1's Avatar
Quote Originally Posted by damox View Post
ozmodchips are selling them (and you can get the infectus too! - Melbourne based)


thanks mate +rep!!

excellent news for the downgrade!

#36 - mushy409 - 188w ago
mushy409's Avatar
Just like to say congrats to those guys. Believe me a LOT of hard work has gone into this.

I was so close to releasing some stuff of my own, but I've been beaten to it... Hats off tho guys, well done! (damn you infectus!)

 

Sponsored Links

Sponsored Links

Advertising - Affiliates - Contact Us - PS4 Downloads - PS4 Forums - Privacy Statement - Site Rules - Top - © 2015 PlayStation 4 News