Sponsored Links

PS4 News on Facebook! PS4 News on Twitter! PS4 News on YouTube! PS4 News RSS Feed!
Sponsored Links
Sponsored Links
Home PS4 News - Latest PlayStation 4 and PS3 News

PSGroove USB Boards and DIY Teensy Schematics Detailed

Sponsored Links
238w ago - With the release of PSGroove opensource PS JailBreak exploit for PS3, many are having trouble sourcing the required Teensy++, AT90USBKEY2 or AT90USB162 boards.

That said, today PS3JailBreak.com (linked above) has shared schematics for the Teensy so that users can build their own if they wish.

As always, click on the picture below to enlarge it folks.

Finally, those who aren't into DIY solutions may also wish to look into either the AT90 USB thanks to Fuddster or the BlackcatUSB Flash Memory Programmer (from version 1.2 on) which uses the same microcontroller (AT90USB162) as confirmed by chesteruhi. More on that soon, including a video!

To quote: "The full schematics are available below (1.0 are on the top 2.0 are on the bottom)."

PSGroove USB Boards and DIY Teensy Schematics Detailed

Stay tuned for more PS3 Hacks and PS3 CFW news, follow us on Twitter, Facebook and drop by the PS3 Hacks and PS3 Custom Firmware Forums for the latest PlayStation 3 scene and PlayStation 4 scene updates and fresh homebrew PS3 Downloads. Enjoy!

Comments 47

• Please Register at PS4News.com or Login to make comments on Site News articles.
#47 - apjmax - 232w ago
apjmax's Avatar
hi friends. i have a question. what is the best schematic an hex to jailbreak the ps3?

there is several options, but i dont know what is the most able to work.

#46 - kamui957 - 234w ago
kamui957's Avatar
I'm probobly going to set off the "noob" alarm here but here goes...

I would love to make my own dongle, however schematics and such are a bit beyond me. I'm wanting to utilize the at90usb646/7 due to the ability to support custom payloads, something most premade dongles can't do. I'm also rather good at soldering and a quick learner.

Can anybody see where I'm going with this?

My plea to anyone who's made a working clone, or at least knows how, where would I need to go and what would I need to learn to get myself to the point that I could build my own clone?

Or would it be possible to get a step by step construction method for a board that isn't in sch and brd formats for those of us that don't do any electrical engineering... yet.

Either would be nice, or rather, any consideration of either would be nice.

#45 - kamatschka - 234w ago
kamatschka's Avatar
But which?! Do I need to look for specific specifications to choose the right ones or doesen't it really matter! ?!

#44 - Red 13 - 234w ago
Red 13's Avatar
You can use two regular schottky diodes to replace the BAT54C

#43 - kamatschka - 234w ago
kamatschka's Avatar
Hi there... Can someone say which diodes to use instead of the dual diode BAT54C ?

They don't seem to have them here in my town... I am going to buy some tomorrow and need to know which axial diodes I can choose for a DiY Teensy! ?

Thank you

#42 - dead5times - 236w ago
dead5times's Avatar
This is my home-made dongle, made almost entirely out of used parts. The at90usb162 was robbed from an xbox360 "Scene-it" IR reciever and the rest was scavanged from dead electronics I had laying around. The only new part was the pcb, which I freehanded the traces using a Sharpie.

#41 - Epicryu - 236w ago
Epicryu's Avatar
i don't really follow a strict scheme i just use the teensy official scheme for base.

the Pics of the board

#40 - Epicryu - 236w ago
Epicryu's Avatar
i just finish crafting mine and i don't have the led issue everything works fine (i compile the psgroove code with the playload (descriptor.h) for peek and poke and add the offset patch)^

i will add pics when i take them ^^

#39 - GSI2 - 237w ago
GSI2's Avatar
Quote Originally Posted by ydgmms View Post
Nope. Still no LED love for me and my Teensy1.0 clone (at90usb162 based).

Oh well.. saves me a few cents on parts for other ones.

Can't make them work also :s but its all working perfectly i'm fxping games to my new HDD 500G

#38 - killpacient - 237w ago
killpacient's Avatar
is it possible to use an AT90usb82 instead of at90usb162? i can`t find it anywhere in my country


Sponsored Links

Sponsored Links

Advertising - Affiliates - Contact Us - PS4 Downloads - PS4 Forums - Privacy Statement - Site Rules - Top - © 2015 PlayStation 4 News