October 16, 2012 // 2:07 am
- Following up on the previous
PS3 IDPS update, today PlayStation 3 homebrew developer Rnd
) has released a Request IDPS Generator version 220.127.116.11 with details below.
Download: PS3 Request IDPS Generator v18.104.22.168
From the ReadMe file: REQUEST IDPS Generator - v22.214.171.124 - Rnd
- Generate a request_idps file
- Get PerConsole Data (board ID, cid, ecid, kiban ID, ckp2_data, ckp_management_id)
Just get your NAND/NOR dump and drop it in this application.
No more need for re-flashing the whole dump in order to convert EID.
Simply it makes it easier to use it with ObjectiveSuites-SetIdps and you dont have to gether it from Sony's server.
Put request_idps.txt in Temp folder in ObjectiveSuites, to set your request_idps and you are done with flashing the new EID.
I'm not responsible for ANY DAMAGE it may cause! USE AT YOUR OWN RISK!
P.S. If somebody has a script to get the EID with ObjectiveSuites, I would be very kind if you could let me know, I will update the application.
Contact me at RndRandomizer
Finally, from zecoxao
: Found it, now we can make our own request_idps files
request_idps.txt (hex) info by Scorpion2k7
name Start offset Size (byte)
per_console_serial 0 8
header 8 96
- Header structure
4 number of file (5)
4 lenght of entire file (value-8)
8 unknown (00 03 00 04 00 00 00 00)
4 file position 1 (value-8)
4 file lenght 1
8 file id 1
4 file position 2 (value-8)
4 file lenght 2
8 file id 2
- File info
File 1 - 16 bytes - 00 12 00 02 00 00 00 00 00 00 00 00 00 00 00 00
File 2 - 2144 bytes - EID0
File 3 - 128 bytes - EID2 PBLOCK
File 4 - 48 bytes - EID4
File 5 - 2560 - EID5
Finally, below is a brief guide from Abkarino
1 - Dump you NAND/NOR flash using a memDump tool or Hardware flasher if you have a higher firmware.
2 - Drag this dump into Request IDPS generator tool to generate the request_idps.txt file.
3 - Set your PC IP Address to: 192.168.0.100 and sub net mask to 255.255.255.0.
4 - Enter a FSM using any dongle/software method you like.
5 - Connect your PS3 to your PC directly using Ethernet cable.
6 - Find the old leaked CEX2DEX conversion tools that contains ObjectiveSuite-SetIDPS.
7 - copy all files from conversion folder into flash drive and put it in the right USB slot in your PS3.
8 - in your PC start copy the generated request_idps.txt into the TEMP folder inside the ObjectiveSuite-SetIDPS folder.
9 - Start ObjectiveSuite.exe then power up your PS3.
10 - Wait for about 1 min and you will see a "PASS" message in ObjectiveSuite.
11 - Now turn off your console.
12 - Flash any 3.55 CFW DEX.
13 - While in FSM remarry your BD Drive using 3.30 DEX PUP + 3.55 Remarry tools from Wiki.
14 - Exit from FSM and now you have a fully functional DEX machine.
via IRC: patch SSL, use REQUEST IDPS Generator, lay back bored (since what happens with SetIDPS isn't really a true conversion, because you just write your own EID to the NOR/NAND).