PS4 News on Facebook! PS4 News on Twitter! PS4 News on YouTube! PS4 News RSS Feed!

Home PS4 News - Latest PlayStation 4 and PS3 News

July 23, 2012 // 6:38 pm - Following up on his previous release, today PlayStation 3 developer judges has updated the Teensy++ 2.0 NOR flasher NORway for PS3 to version 0.5 with additional updates and their changes outlined below.

Download: NORway PS3 NOR Flasher for PS3 v0.5 / NORway PS3 NOR Flasher for PS3 v0.5 (Mirror) / NORway PS3 NOR Flasher for PS3 v0.6 Beta / NORway Latest Beta / norpatch.exe (v4.60.0) / norpatch.exe (v4.65.0) / norpatch.exe (v4.66.0) / norpatch.exe (v4.70.0) / norpatch.exe (v4.75.0) / GIT

NORway v0.5 Changelog:

  • Added block table for Samsung K8Q2815UQB. The programming modes "writeword" and "writewordubm" don't require manual chip/sector erase prior to writing anymore!
  • Bugfix: "NORway.py COMx release" didn't work. Now you can leave Teensy powered at all times and console will boot up correctly after issuing a "release" command
  • Bugfix: increased TRANSMIT_TIMEOUT for Teensy's serial device to 10000ms (required for OS X)
  • Bugfix: disabled DSR/DTR flow control (wasn't working reliably on OS X)
  • Bugfix: TRISTATE wasn't set correctly
  • Added additional verification when writing is done. Although each write command verifies each written sector/block, it happened that written bytes weren't persistent
  • Added "verify" command

NORway v0.6 Beta Changelog:

  • Changed programming modes "write", "writeword" and "writewordubm" to "vwrite", "vwriteword" and "vwritewordubm".
  • Added new programming modes that skip verification for single 4KB blocks: "write", "writeword" and "writewordubm".
  • Moved verification algorithm to Teensy.

Update: From littlebalup: Hi ladies and gents, As an alternative to WAYgui by Swizzy, here comes my personal simple programs, written in batch and compiled as exe, to easily launch and work with the well known NORway and NANDway python scripts by Judges.

Download: NANDway_launcher.zip / NORway_launcher.zip / WAY-launchers v2.01.zip / WAY-launchers v2.02.exe / WAY-launchers v2.03.exe / NORway_launcher.sh / NORway_launcher.sh (Fully Compatible Linux / Mac) / NORway_launcher.sh (NORway_launcher script) / NANDway_launcher.sh (NANDway_launcher script) / WAY-launchers-master.zip / GIT

Features:

  • Multi-lingual (English and french only for the moment, with auto-detection per windows language) If someones would like to translate to another languages, sources are available.
  • Teensy COM port auto-detection
  • Multi-dumps (I mean you can define a quantity of dumps to perform)
  • Binary dumps comparison after dumps (if multi-dumps) with log file.

Install note:

  • Simply paste the exe files into the same directory as NORway.py / NANDway.py
  • Execute

Update #2: Small update of the batch versions (now v1.9, same download links above).

New release v1.01 of the GUI:

  • Added Teensy programming feature: can load .hex file by clicking on the teensy picture.
  • Dump file extention changed: was "*.x.bin", now is *.bin" if only one dump and "*_x.bin if multi-dumps.

New version v2.00 of the GUI:

  • Removed embedded console due to problems with scripts output redirection.
  • Now scripts launched in a separate regular console prompt window.
  • "Save screen" and "Kill process" buttons removed as well. Instead, you can copy from console to save screen and use Ctrl+C to kill process if needed.

New version v2.01:

  • v2.01: Bug correction about Multi-dumps and binary checks. (Thanks to Joris 73 from LS)

WAY-launchers v2.02:

  • v2.02: Added compatibility with the latest USB serial drivers from PRJC: "Teensy USB Serial" driver now detected as well as the old one.

Here a new release of my GUI for NORway/NANway/SPIway: v2.02: Added compatibility with the latest USB serial drivers from PRJC. "Teensy USB Serial" driver now detected as well as the old one. Also means it is working well on Windows 8.1 now.

WAY-launchers v2.02 - GUI to run NORway, NANDway & SPIway scripts by Judges.

WAY-launchers v2.03:

  • v2.03: Correction of a minor bug concerning error level detection from python scripts.

ATTENTION: The use of this program is at your own risk! The author can not be held responsible for the consequences of its use.

Simple GUI, written in VB.net and batch, to easily launch and work with the well known NORway, NANDway and SPIway python scripts by Judges for PS3 and PS4 hardware flashing using Teensy++ 2.0.

ADDITIONAL FEATURES:

  • Teensy COM port auto-detection
  • Teensy programming (load .hex file by clicking on teensy picture)
  • Multiple dumps (you can define a quantity of dumps to perform)
  • Binary dumps comparison after dumps (if multi-dumps) with log file.

SYSTEM REQUIREMENTS:


INSTALL INSTRUCTIONS:

  • Install python, pyserial, Teensy drivers, scripts... per Judges's instructions (github.com/hjudges/NORway)
  • Simply paste the "WAY-launchers.exe" file into the same directory as NORway.py / NANDway.py / SPIway.py.
  • Execute

CHANGE LOG:

  • v2.02: Added compatibility with the latest USB serial drivers from PRJC: Teensy USB Serial driver now detected as well as the old one.
  • v2.01: Bug correction about Multi-dumps and binary checks. Thanks to Joris 73 from LS.
  • v2.00: Removed embeded console due to problems with scripts output redirection. Now scripts launched in a separate regular console prompt window. Save screen and Kill process buttons removed as well. Instead, you can copy from console to save screen and use Ctrl+C to kill process if needed.
  • v1.01: Added Teensy programming feature: can load .hex file by clicking on the teensy picture. Dump file extention changed: was *.x.bin, now is *.bin if only one dump and *_x.bin if multi-dumps.
  • v1.00: First release

Update #3: New version of NORPatch available from judges: Norpatch v4.60.0

  • Added OFW 4.60 recognition

Update #4: New version of NORPatch available from judges: Norpatch v4.65.0

  • Added OFW 4.65 recognition

Update #5: New version of NORPatch available from judges: Norpatch v4.66.0

  • Added OFW 4.66 recognition

Update #6: New version of NORPatch available from judges: Norpatch v4.70.0

  • Added OFW 4.70 recognition

Update #7: New version of NORPatch available from judges: Norpatch v4.75.0

  • added OFW 4.75 recognition

Linux Edition

A "Linux Edition" of the "NORway Launcher" console version is now available. Available soon for "NANDway Launcher" as well.

All the features of the Windows batch version are there (teensy port auto-detection, multi-dumps, binary comparisons...)

Developed and tested on debian based system (rpi / raspbian).

Quick guide to run judges scripts with linux:

- Ensure "python" and "python-serial" packages are installed:

[Register or Login to view code]



  • Get the latest Judges' files from his GitHub repo: github.com/hjudges/NORway, then unzip files.
  • Program your Teensy with the NORway.hex file using the PRJC loader and instructions available there : pjrc.com/teensy/loader_linux.html
  • Plug or unplug/re-plug your programmed Teensy, then, just after, run:

[Register or Login to view code]

So, you should obtain something like that at the end:

[Register or Login to view code]

Where " ttyACM* " is your serial port, fully named " /dev/ttyACM* ". Note this port name.

  • Go to your NORway unziped folder then make the NORway.py executable:

[Register or Login to view code]


  • Now you can start to run Judges's script with:

[Register or Login to view code]

example of dump command:

[Register or Login to view code]

To use with my script:

  • Past the "NORway_launcher.sh" file to the same folder as the "NORway.py" file.
  • Make it executable:

[Register or Login to view code]



  • Run:

[Register or Login to view code]

enjoy

Just tested on Mac OS-X as well. It works (partially).. but you have to manually set serial port which is something like /dev/tty.usbmodem*

To find it: ls /dev/tty.usbmodem* once connected. Maybe some bugs. I'll work for a full Mac support as well (so, will be "Linux & Mac edition).

Linked above is a new beta script that should be fully compatible Linux/Mac.

Script revised to v1.01 and renamed "Linux & Mac Edition" now supports Mac as well as Linux and certainly some other Unix based OS. NANDway script also available (linked above).

Update #8: Small update: Release v1.02

With some minor bug corrections + some improvements as:

  • NORway / NANDway version check with warning message.
  • Comparison log improvement.

Update #8: From littlebalup comes TEENSY2PS3 - PCB "Linker" Teensy++2.0 <-> PS3 with details HERE (via logic-sunrise.com/forums/topic/66446-teensy2ps3-un-linker-teensy20-ps3-nor-et-nand/), roughly translated as follows:

I present you my project of a simple PCB (printed circuit board) to facilitate the use of our teensy++2.0 for the flash of PS3 NOR and/or NAND:

Intent:

  • Simple
  • Cheap
  • Easy (to use, to assemble...)
  • Smallest as possible with board traces shorter as possible.
  • Compatible NOR and NAND (SBE) and switchable/reversable between both.
  • Compatible 360-Clips NOR and NAND.
  • Usable with existing layouts and softwares (judges' ones), teensy equiped with voltage regulator or not, etc...
  • Modular (for futur extentions as TSOP adapters for raw NOR/nand... maybe)

So I designed, built and tested a prototype since a couple of months with very good results. Some pictures:

NakedPCB:


PCB Equipped:


With Teensy and 360 clip boards:


Usage on NOR with SCSI 50 pins cable:


For those who are interested, here the gerber files to manufacture this board: TEENSY2PS3_v1.00

I'll post a "user manual" later (I have to translate it )

Meantime, I developed a new version (v1.01) with some minor improvements and the addition of optionnal "POWER LED" and "TRISTATE LED":


Build in process... For info, I just tested on Red Ribbon (otherOS)... it works great too. Not useful but fun: flash a PS3 by another PS3.

A video showing NOR tristate LED usage on the v1.01:

TEENSY2PS3 v1.01 - NOR Tristate LED Demo




v1.01 release coming very soon. v1.01 released:

Download: TEENSY2PS3_v1.01.zip / TEENSY2PS3_v1.01_manual_EN.pdf


NORway - Teensy++ 2.0 NOR Flasher for PS3 v0.5 is Released

NORway - Teensy++ 2.0 NOR Flasher for PS3 v0.5 is Released

NORway - Teensy++ 2.0 NOR Flasher for PS3 v0.5 is Released

Follow us on Twitter, Facebook and drop by the PS3 Hacks and PS3 CFW forums for the latest PlayStation 3 scene and PS4 Hacks & JailBreak updates with PlayStation 4 homebrew PS4 Downloads.



#21 - moja - August 13, 2011 // 6:02 pm
moja's Avatar
Wow, this is great news, and thanks for the version updates throughout the thread.

This is very exciting - it's like the JTAG hack for 360s, but without the fuse limitations. Do we know if the install diagram is similar for all models?

Perhaps a good homebrew software flasher will be worked on, especially with the new SDK leak. If this method proves reliable, I think I'll mount my Teensy inside and put a mini USB port on the case.

#20 - PS4 News - August 9, 2011 // 10:45 am
PS4 News's Avatar
For those following, NORway - Teensy++ 2.0 NOR flasher for PS3 v0.3 is now released by judges:

Download: NORway v0.3 for PS3 / NORway v0.3 for PS3 (Mirror) / GIT

Changelog:

  • Speed optimizations
  • Dumping now only takes 45 secs instead of over 5 mins!
  • Writing now only takes about 8.5 mins instead of over 2 hours!

#19 - PS4 News - July 28, 2011 // 6:09 pm
PS4 News's Avatar
Below is a roughly translated guide from calimba on how to do a PS3 NOR dump with a Teensy 2.0++ device: demonhades.org/foro/viewtopic.php?f=224&t=4892#p31010. I have also added the NORway v0.2 for PS3 update to the first post.

Community well this is my first tutorial I hope you understand me. I'll be putting images to be more clear, then began:

Requirements:

  • Teensy 2.0 + +
  • Norway 0.1
  • Obviously a PC

1. Unzip the Norway where we want and install the serial_install.exe that comes inside the zip then download it and install it.

Python 2.7.2 (http://www.python.org/ftp/python/2.7.2/python-2.7.2.msi)
pyserial 2.5 (http://pypi.python.org/packages/any/p/pyserial/pyserial-2.5.win32.exe)

2. Program with the Teensy hex that is inside the folder "default" of Norway


3. Solder to play the 3 because of the review board is different from the diagram, here are a few. I used this:


And these are the points of the teensy:


4. Ya all welded to the plate and console ps3 off with the red LED and connect the usb to pc teensy then went into the Device Manager and look for Ports (COM & LPT) as you can see the next image to I really teensy detected in COM3


5. Open the windows command line CMD and go as far as Norway and unpack the NORway.py write in my case COM3


6. Then ignition internal green LED console and type in CMD flash.bin NORway.py COM3 dump and start making the dump, as you'll see in the image does not take much 2 minutes 38 seconds



7. Last step. After the dump CMD wrote in COM3 NORway.py NOR release to reset and turn off the console and disconnect the teensy and ready and we have the dump of the NOR


PS: I'm not very good with photocase this
PD2: I did everything in windows 7 x64

I want to thank Demonhades, Jaicrab rather the entire mark HadesTeam also thank the Judges and Norway

#18 - Bulldogzz - July 28, 2011 // 4:32 am
Bulldogzz's Avatar
Couldn't we use this to flash a DEBUG FW onto Retail PS3's?

Also does this mean we can modify the QA Flag on new FW's?

Sorry for the newby questions.

#17 - severusx - July 27, 2011 // 1:42 pm
severusx's Avatar
That is a lot of soldering, but at least it is all on points or pads so it shouldn't be that hard for someone with a moderate amount of experience. At least you don't have to solder onto any of the traces directly. I had to do that to fix my custom fight stick (toodles based stick for 360/PS3/PC) for MvC3 and it was a bitch trying to get a wire to stick to a trace the size of a human hair.

#16 - spawnofjago - July 27, 2011 // 8:49 am
spawnofjago's Avatar
Can this be possible with a minimus avr, if so can someone offer a tut. Really appreciate it, Thanks!

#15 - HeyManHRU - July 27, 2011 // 6:03 am
HeyManHRU's Avatar
Nice, So I can play all the latest games and on PSN whilst 3.66 OFW (Or the newest FW), and after a month or so I can downgrade to 3.55 CFW.

Both Sony and Hackers are winners.

#14 - rocha160 - July 27, 2011 // 4:14 am
rocha160's Avatar
Quote Originally Posted by PS3 News View Post
According to judges it seems possible, as he stated "I've already managed to downgrade my OFW 3.61 to CFW 3.55."

Keep in mind the crazy install soldering required to do it though.

thanks for answering my stupid noob questions.

#13 - Mantagtj - July 27, 2011 // 3:56 am
Mantagtj's Avatar
LOL , Soldering is a problem tho it looks really pretty when it is done, wishing I kept the teensy++ now but I kept the other usb - we wont mention names lol, shame I havent friends that solder they all turn to me for mad stuff like this, congratulations tho, I might wait until I goto college for 10 years to learn to solder (my soldering looks like welding pmsl)!

#12 - KrzyInuYasha - July 27, 2011 // 1:49 am
KrzyInuYasha's Avatar
While this makes me glad I bought a Teensy++ 2.0 the thought of soldering 40+ wires makes me cringe. It's been way too many years since I've had to solder that many wires into a console, not since I put a DMS3+ into my V4 PS2 years ago.