PS4 News on Facebook! PS4 News on Twitter! PS4 News on YouTube! PS4 News RSS Feed!

Home PS4 News - Latest PlayStation 4 and PS3 News

January 5, 2012 // 8:49 pm - Today the E3DIY Team have announced that the E3 Flasher nows officially supports PS3 dual-booting alongside news of their upcoming E3 Move Suit below, as follows:

Download: E3 Flasher PS3 Dual-boot Upgrade / E3 TBJB2 CFW Checkoff / E3 TBJB2 CFW Checkoff (Mirror - PASSWORD IS: ILOVEE3) / E3 Flasher Fast Dual-Boot Manual

Please note if your console can't dual boot, don't upgrade this firmware.

2012 New Year gift from E3 Team

1: Fast dual boot is now available. There are no brick risk any more! (Cause the operations are done on E3 onboard NOR instead of PS3 NOR flash)

All E3 flasher limited and E3 nor flasher can operate this way, click here to download file. We're now producing 1000 more pieces of E3 flasher Limited version for those interested on dual boot.

2: E3 TBJB2CFW CHECKOFF available , the E3 flasher downgraded console can also works with TBJB2, click here to download file and enjoy new game.

Please note you still need the TBJB2 device. You can install this CFW on PS3 with recovery MODE or re-downgrade PS3 with this file, instead of STEP1 PS3UPDAT.PUP file.

3: E3 MOVE SUIT, the first third-party PS3 MOVE controller suite will be released soon, it will be fully compatible with all PS3 fat and slim, there will be many available colors, more comfortable design and more economic price to bring you a better enjoyment. You have a better choice now to add to the original accessories.

The E3 MOVE SUIT include 4 parts: E3 Navigation Controller, E3 motion controller, E3 Camera, and E3 camera stand.

E3 Flasher Supports PS3 Dual-Booting, E3 Move Suit Incoming

Follow us on Twitter, Facebook and drop by the PS3 Hacks and PS3 CFW forums for the latest PlayStation 3 scene and PS4 Hacks & JailBreak updates with PlayStation 4 homebrew PS4 Downloads.

#762 - PS4 News - July 24, 2015 // 8:38 pm
PS4 News's Avatar
Quote Originally Posted by chroncile View Post
Um, what happened to my thread?

I merged it into the ongoing E3 discussion thread since it revolved around one of their products, as this is where we keep / archive all of the related E3 topics.

If you want to start a new help thread you can when your ribbon arrives though.

#761 - chroncile - July 24, 2015 // 8:33 pm
chroncile's Avatar
So I just opened up my PS3 and sanded down the part of the clip that's close to a resistor on the board (even though it wasn't touching it), cleaned up the clip with some alcohol, added a rubber piece on top, a penny, and another rubber piece and then I noticed that the ribbon had a small tear in it.

I just ordered a new ribbon from eBay. Hopefully it gets here in less than 2 weeks unlike the E3 flasher kit which took 2 months!

As for the log file, it doesn't mention any errors. Everything is OK on it.

BTW, I tried adding pressure with my hands to make some backups before I took apart the PS3 and this time the dumps had 38 dangers instead of 42.

Um, what happened to my thread?

#760 - windrider42 - July 23, 2015 // 11:50 pm
windrider42's Avatar
There should be a log file also recorded on the Microsd card. You could send that txt file to racer as well.

You have determination. I remember your post now. But yeah you need verified dumps before flashing back, so do as said above.

#759 - metzen - July 23, 2015 // 8:48 pm
metzen's Avatar
Misiozol is right. You need to get a valid dump from the E3 flasher. I know you say that you have enough pressure it sounds like you need to have more pressure applied. When you are making the dump you can apply even pressure with the clips with your fingers.

Please try this again and then run the verifier to make sure you get all good and no error. I used a Sd card plastic piece from a laptop and just applied pressure with that and worked on the third dump.

PM racer and you can also have him verify your dumps for you. Good luck and post back your results.

#758 - misiozol - July 22, 2015 // 2:31 am
misiozol's Avatar
Wrong , it will produce bad dump as not all addresses will be read !! Not much of options there , either you doing something wrong while dumping flash or your E3 if faulty (inner soldering) and makes bad dumps , be sides e3 is not best option in flashers but definitively cheapest inc. clip , if you have some soldering skills would look for teensy2.0++.

#757 - chroncile - July 21, 2015 // 2:59 pm
chroncile's Avatar
Okay so what are my next steps? I'm sure the clip is making contact with the nor chip otherwise it wouldn't even produce a dump, correct? What should I do?

#756 - PS4 News - July 21, 2015 // 2:30 pm
PS4 News's Avatar
Go us!!!

Such a dedicated Moderation Team hehe

#755 - misiozol - July 21, 2015 // 2:26 pm
misiozol's Avatar
The other one would be me , and it's really a bad dump.

#754 - PS4 News - July 21, 2015 // 2:05 pm
PS4 News's Avatar
Quote Originally Posted by chroncile View Post
Can you remove my attachment from my first post?

Done, only me and one other here downloaded it based on the view count.

FYI I also removed the craplisted url linked in your other post as we don't allow it here due to past issues.

#753 - misiozol - July 21, 2015 // 6:13 am
misiozol's Avatar
Then go there , and do as they say