PS4 News on Facebook! PS4 News on Twitter! PS4 News on YouTube! PS4 News RSS Feed!

Home PS4 News - Latest PlayStation 4 and PS3 News

January 2, 2011 // 12:53 am - Here is the fastest possible way of converting a Kiosk/Demo PS3 to a fully functional retail PS3. Tested on the Kiosk/Demo PS3 I received recently.

I was going to dump it's vsh & dev_flash2 but apparently something messed up and it failed. Good thing I have a second Kiosk PS3.

Previous methods required PS3 downgrading, installing Acid CFW and of course there is always the PS3 Demo Unlock Codes.

Before starting, download the vsh.rar along with a copy of Comgenie's Awesome FileManager, Waninkoko's Free Flash, and the Kiosk HEX payloads.

NOTE: The attached dump is ONLY for 3.41 consoles.

1. Flash a Kiosk payload to your jailbreak device.
2. Insert the JB device into your PS3, insert a disc into the PS3. Hard power off the PS3 (unplug or back switch), then hard power it on (plug or back switch). When it restarts automatically hard power it off again as soon as you see the blue light flash. Hard power it on once more.
3. Power On button then Eject within 0.2 seconds.
4. Go to System -> hover over Security Settings, hold L1 + R1 + Select + Square, then type in the unlock code for 3.41: 2998.
5. Place Comgenie's Awesome Filemanager, FreeFlash, and the vsh folder onto a USB thumb drive and insert it into the PS3. Install both packages and run FreeFlash.
6. Run ComgenieAwesomeFilemanager. Browse to /dev_fflash/vsh/. Switch over to the right side and browse to /dev_usb00x/vsh/. Press select, circle, then start.
7. Wait until it finishes copying over. Hard reset your console, and it's done!

For those interested, the vsh is from a CECHE01 console, but I tested it on a Demo CECHA01 and it worked.

Convert PS3 Demo / Kiosk to Retail - No Downgrades or Reinstalls

Follow us on Twitter, Facebook and drop by the PS3 Hacks and PS3 CFW forums for the latest PlayStation 3 scene and PS4 Hacks & JailBreak updates with PlayStation 4 homebrew.

#13 - II KaRmA - January 8, 2011 // 7:05 pm
II KaRmA's Avatar
Can i just use me ti-84 caluclator for this?

I figured out the problem, i can't mount the dev_fflash thing, how can i fix that?

#12 - buglio - January 8, 2011 // 6:20 pm
buglio's Avatar
i've made exactly as i've already written.. anyway, have you rebooted in recovery mode? (see attached image)

to reboot in recovery mode, keep pressed start botton, until you heard a double quick beep... to browse recovery mode menu, you have to plug the controlled with cable.

if you have arrived in this point, select 6 - (system update) and install the firmware 3.41 kiosk (i had previously put in a usb key)... wait the installation complete and nothing else.. when rebooted all the menu were recovered.

i hope you will rise up your ps3.


#11 - II KaRmA - January 8, 2011 // 3:05 pm
II KaRmA's Avatar
Can you tell me step-by-step cause it won't work for me.

#10 - buglio - January 5, 2011 // 6:10 pm
buglio's Avatar
i have followed this guide (i've a kiosk CECHH04 40 giga model).. but after rebooting, my XMB, hasn't any menĂ¹!!! only the "moving wave"... is possible to recover my consolle? how can i access to flash directory to replace the old VSH directory. thanks in advance.

hi, still me. fortunately, my ps3 is back!!! if someone else should fail the flash update, my experience could be interesting:

1- reboot in recovery mode
2- select system update..
3- the installation of the new firmware, replaces the correct flash directory.

it was easier than i imagined.

#9 - Haksam - January 2, 2011 // 7:16 pm
Haksam's Avatar
i just want to add: PLEASE BE CAREFUL with Comgenie, everytime I see those dev_flash folders I feel pretty scared that I might delete them accidentally. (Deleting anything here can break your ps3 anytime)

There's two modes, blue screen and red screen, if you don't understand what these are, just read the text carefully, then learn how to back up all the folders on the left via blue screen mode first to a USB stick before doing any modifications!

#8 - n4ru - January 2, 2011 // 6:48 pm
n4ru's Avatar
Ah okay, I said that to clear confusion about hardware revisions, not cause it

#7 - DeViL303 - January 2, 2011 // 6:28 pm
DeViL303's Avatar
I'm just referring to the way you mentioned different hardware revisions, some noobs reading that might think you were saying that they were different in some way but they are in fact exactly the same across all regions and HW versions (3.41 retail dev_flash folders I mean).

#6 - n4ru - January 2, 2011 // 5:34 pm
n4ru's Avatar
Debug and Kiosk are also the same with the exception of the vsh folder, which is why conversion is so easy. And since the EID for Demo/Kiosk units is EXACTLY THE SAME as Retail units, there is ZERO difference once you replace the vsh folder.

#5 - DeViL303 - January 2, 2011 // 9:32 am
DeViL303's Avatar
hi, just so everyone knows all dev_flash folders are the exact same for all models across all regions, (on same firmware of course ) its only dev_flash2 and dev_flash3 that are different . So it doesnt matter if your on slim 3.41 , or launch model 3.41 etc, as long as its retail 3.41 they are 100% the same. (not debug 3.41 or kiosk 3.41 obviously )

#4 - IndyColtsFan84 - January 2, 2011 // 8:08 am
IndyColtsFan84's Avatar
thanks for the info, i'm guessing ebay is the best place to find demo unit?