Sponsored Links

Sponsored Links

Code Unique 3 (CU3) PS3 Cheat Device for Custom Firmware Arrives

Sponsored Links
110w ago - Today we have received word of the Code Unique 3 (CU3) PlayStation 3 cheat device which supports Custom Firmware including Kmeaw, Rebug and Rogero PS3 CFW.

Download: Code Unique 3 2 - With Ps3 Cheat Editor 2.20 - FIXED 4.21+.rar (50.3 MB) / Code Unique 3 2 - With Ps3 Cheat Editor 2.20 - FIXED 4.21+.rar (Mirror) by Grasshopper

Below are the details from the official site, as follows:


1. Unique dongle in the world which support ps3 all firmwares (Kmeaw 3.55 / Rogero 4.21 / 4.3 / Rebug 4.3) simultaneously
2. Built-in 4 MB Flash and ACTEL chip set, powerful calculation power, support static and dynamic multi level pointer, modify games thoroughly.
3. Provide in game screen capture.
4. Support custom db st.dat, support plain text codes, in that way take advantage your own codes easily, no matter.
5. Support dual codes db update, you can switch code db in management section.

PS3 Install

1: Download PS3_CU3_4.X.pkg and install to PS3
2. Download according codes db to any usb disk root directory cheatlist.dat Official code update file (Official support cheat code in 4.xx cfw, and VIP support)
cheatcu2.dat Custom dat file (non official, game sites and forum released file, file name"st.dat" should be rename to "cheatcu2.dat" )
cheatcu2.txt Custom txt file (Complete open protocol, you can add, delete , modify your own cheat code)
3. CU3 support dual code switch,( press SELECT+L2), and the custom code file can be dat or txt, so the combinations could be:
A: cheatlist.dat+cheatcu2.dat
B: cheatlist.dat+cheatcu2.txt

3: According to your favor, plug in both the USB disk with ".dat" file and the CU3 dongle to PS3( don't use an usb extending cable), turn on PS3, after boot up, it shows " Updating cheatcode, Don't eject the device!..." after update it will enter CU3 game selecting page. After successful updating, ".dat" file in USB disk would be deleted.(Official dat file would be deleted in 1 minute, custom file in about 1 minutes and 40 seconds, please be patient)

Attention: when you have updated with dat file,pls power off your console and restart it.

Each cfw use different way to load CU3:

  • Debug 4.21 cex/dex after turn on ps3, enter multiMAN once, back to XMB, than load CU
  • Debug 4.30 after turn on ps3, enter multiMAN once, back to XMB, than load CU
  • Rogero 4.30 after turn on ps3, load cu
  • Kmeaw 3.55 after turn on ps3, load cu

Attention: You can stop booting from CU by long time press "Select". Minimum requirements of MM version is Ver 04.18.00.

Button config

R1 switch between cheat codes page and Game list only page
L1 switch official cheat codes and custom cheat codes in Game only list
Circle: Boot the game without loading cheat code
Square: Show cheat code menu
Triangle: copy and delete game in main cheat code page, search code in Game only page
X: Exit

PSN games cheat code are a little different, in CU3 page, pres L1 to switch to list mode before load the cheatcode, other steps are the same.


Q: I studded in updating dat file when showing the information screen, what can I do?

A: 1: Turn off and turn on PS3 to see if the dat file is updated. Second, check dat file in the USB disk is deleted. It's OK if positive, the system is fake death only. Otherwise, you got to update it again, or use another USB disk to try again.

2: Make sure the dat file is not corrupted, if you use txt file, it should be ended with 2 blank lines.

Q:Why the game hung, the cheat code not functioning etc.

A: As our experience of hundreds of games, system hung up, black screen, not functioning are because of 5 situations, please check.

Q: It shows "Unknown usb device" when I plugged in the CU3 dongle, it is normal?

A: Yes it is expected, the dongle could be malfunction if there is no such notice.

1: Occasional hung up of CU manager when loading the cheat code with START button , we did not find the cause of this weird situation, sorry

2: Version of game not correct cause hung up. For example the version of code is "XXX" Japanese version, small version code is 1.04, but your game updated to 1.06, in this case hung up is expected, or the cheat code is Japanese version and your game is US version, it also would be hung. So please select the cheat code strictly according to your game. (CU will inform you if the version is incorrect)

3: Load too many cheatcodes. Obviously, cheat code will modifying the memory where the game running, more cheatcodes loaded, the game become more unstable. In this case you can remove the codes gradually to prevent system hanging. Especially RPG game, modify the money to 9999999 and save, next time you don't need to use CU to modify it, so the game will not hang up be sure, and the number of kits etc. Use your brain so to speak.

4: The game could not progress after loading cheatcode. That's simple, you can 1: delete your game data file( backup game data by ftp) and create the game data again. Or 2: Unload the cheat code and CU to start the game again.

5: Most of the games will install data to harddisk, if the game not install completely and loaded the cheatcode, black screen or hang up will be for sure. So please confirm that the game is install correctly and create a game data before loading the cheatcode.

The solutions above are precious experience , you should solve most of the black screen and hung up problems using these techniques. If you still have questions, please join the qq group to ask other players, and the dongle has one year of warranty.

CU3 official QQ group: 36715716

1: In game you can press "HOME" to call XMB, and select "Photo->Save Screenshot".
2: Captured photo will be saved in "Photo" directory, they could be grouped, backup etc.

Finally, it is not recommended to invest in this DRM-infected dongle as according to PlayStation 3 dongle hacker oct0xor via Twitter: Just can't wait! But it looks like clone of clone of clone

Stay tuned for more PS3 Hacks and PS3 CFW news, follow us on Twitter, Facebook and drop by the PS3 Hacks and PS3 Custom Firmware Forums for the latest PlayStation 3 scene and PlayStation 4 scene updates and fresh homebrew PS3 Downloads. Enjoy!
Sponsored Links
Sponsored Links

Comments 111 Comments - Go to Forum Thread »

• Please Register at PS4News.com or Login to make comments on Site News articles.
#61 - angeloamd1985 - 19w ago
angeloamd1985's Avatar

#60 - Endimion - 19w ago
Endimion's Avatar
Quote Originally Posted by PS3 News View Post
That is a mirror for Code Unique 3.2 with PS3 Cheat Editor 2.20 Fixed for 4.21.

Only for 4.21? Give me for 4.50+, NOW!

#59 - PS4 News - 19w ago
PS4 News's Avatar
Quote Originally Posted by Endimion View Post
What is it?

That is a mirror for Code Unique 3.2 with PS3 Cheat Editor 2.20 Fixed for 4.21.

#58 - Blaster99 - 19w ago
Blaster99's Avatar
I doubt that there will be any update. There is ps3 cheat instead.

#57 - hoangnm - 19w ago
hoangnm's Avatar
please cover to habid 4.65

#56 - Endimion - 19w ago
Endimion's Avatar

What is it?

#55 - black2303 - 19w ago
black2303's Avatar
Heyy, I'm newbie, help please, can I using a code unique 3 on my cfw Rogero 4.55 v1.0?

#54 - Endimion - 20w ago
Endimion's Avatar
There is a software inside to upgrade the CU3 and the file to do it cu3_update.dfu, i have an error "the file doesn't have the correct format"

The same problem. Please, help!

#53 - PS4 News - 21w ago
PS4 News's Avatar
Here is a mirror: http://www.mirrorcreator.com/files/ZEBWOSPY/Code_Unique_3_2_-_With_Ps3_Cheat_Editor_2.20_-_FIXED_4.21_.rar_links

#52 - cabelokira - 21w ago
cabelokira's Avatar
links off reups please my friend.


Sponsored Links

Sponsored Links

Advertising - Affiliates - Contact Us - PS4 Downloads - PS4 Forums - Privacy Statement - Site Rules - Top - © 2015 PlayStation 4 News