January 13, 2011 // 8:12 pm
- Just under a week ago we reported
on news of a successful PS3 downgrade from 3.55 to 3.41 Firmware, however, it ended up not being reproducible until a PS3 3.55 to 3.41 Firmware Downgrader arrived today courtesy of solidpsycho
through a guide from AmazingLarry
/ PS3 3.55 Downgrade (3.41)
To quote: Here is a patched 3.41 that allows you to downgrade. I patched the info0 to 356, and I also used Warrens method to bypass the br drive during the update. I have tested this on both of my PS3's and haven't run into any problems.
3.55 Downgrade has been confirmed on both FAT and SLIM consoles.
Please note you CANNOT use these files if you bought a PS3 that came stock with FW 3.50. DO NOT DO IT. STOP NOW.
THE SAME WARNINGS AND RULES APPLY:
You may want to download geo's 3.55-jb
and install that and blackb0x ftp if you have not, it will be very useful for the next bit.
Blackb0x FTP server 1.2: Blackb0xFTP for 3.55 FW
If you have a fat PS3 with 256MB NAND you will need to back up your dev_flash folders, as you WILL LOSE BLURAY PLAYBACK
. (on my FAT model i restored the DRL1 and DRL2 files in del_flash(2?) I did get to however keep all of my signed 3.55-jb homebrew, and it all works in retail mode except of course backup managers)
If you have a Small NAND SLIM or FAT console it would be a good idea to do one or both of the following:
In the XMB perform a system backup to save installed Homebrew you may have and gamesaves etc.. to an external device (i did this with my slim and it worked perfectly, all my installed signed homebrew from 3.55-jb works in retail 3.41 now)
make a COMPLETE backup of your HDD on your ps3 using ftp, although i dont think installed packages can be moved back over simply by ftp. i only tested the first method.
And now to downgrade:
You will need a downgrader dongle, search the forums for a DIY or buy one, or get an android/iphone, or an ipod nano, etc...
Unplug or switch off your console and then switch back on or plug back in.
While still OFF connect your Jailbreak/Downgrade device and press POWER then quickly Eject, you PS3 console should turn itself off automatically
OPTIONAL - Turn your PS3 on to verify you are in Service Mode (you will see a big red box, you can't miss it) then turn your PS3 back OFF
Place the lv2diag.self (FILE 1) from the archive and the PS3UPDAT.PUP (3.41 FW) from the archive on the root of a usb device and plug into the rightmost port on your console (dev_usb0)
Power on your PS3 with the usb device in and have a coffee, it can take a few moments for the PUP to install, your PS3 will turn off automatically
NOTE: if your system seems unresponsive and the light just stays green for ten minutes or more you need to use a different usb stick. i've had sporadic results with several different sticks.
Power your ps3 back on, you should still be in service mode, check your FW version now to verify you have downgraded successfully. Turn Off
Remove previous archive files from usb stick and now place lv2diag.self (FILE 2) on the root of your usb stick
Place usb stick in rightmost port of your PS3 (dev_usb0)
Turn PS3 back on with usb in place, it should turn itself off very shortly after.
Turn your PS3 back on and go through the configuration again.
5C3B09C7FB0655D3F8852D3AAD778025 PS3UPDAT.PUP (3.41 FW)
099F33A7967F99E91C07E870FD78B3DB Lv2diag.self (FILE 1)
7A20BFDAE65EEFB47A4425DB1B52DCDE Lv2diag.self (FILE 2)
Thanks mathieulh, solidpsycho, and everyone else.
Below is a video from PSGroove (linked above) and from Quakes69
Log: Notice "os version = 03.4100" 8 lines from the bottom.
[Register or Login to view code]
Finally, from rms