Sponsored Links

PS4 News on Facebook! PS4 News on Twitter! PS4 News on YouTube! PS4 News RSS Feed!
Sponsored Links

Home PS4 News - Latest PlayStation 4 and PS3 News

PS3 CFW 4.30 DEX by MiralaTijera for OFW & CEX2DEX Converts Out


Sponsored Links
103w ago - Following up on his recent work, today Spanish PlayStation 3 developer MiralaTijera has released PS3 CFW 4.30 DEX for both PS3 Debug OFW and CEX2DEX converted consoles.

Download: PS3 CFW 4.30 DEX by MiralaTijera (dex430cfw.rar) / PS3 CFW 4.30 DEX (Patched) by MiralaTijera (mod431.rar) / DeltaPatcher v1.0 Win32 Binary / PS3UPDAT.PUP.430.001-DEX-MiralaTijera.rar (Patched Full PUP) / DEX_CFW_4.30_PS3UPDAT.zip (178 MB - Mirror)

To quote (via pastie.org/private/emwfwuoizwvq8tlirp6a): PROCEDURE CFW CREATION IS MIRALATIJERA same as CEX, we use DELTA PATCHER and the original file chose the PS3UPDAT.430.001 ORIGINAL AND THE PATCH THE FILE ATTACHED you create an installable ANY cfw 4.30 dex without bricking.

  • deleted lv1ldr protection against consoles converted "unofficially"
  • lv2 peek / poke
  • lv1 peek / poke
  • Integrated and Iris Payload Manager 2.21
  • spu_iso_rvk_pkg reinstall cfw patched for successful
  • spu_token_processor (qa flag activated if you had installed since 3.55) -

I add more things tomorrow, for now is basic but is a cfw

Mini Tuorial:

1. Download the DeltaPatcher from here: https://mega.co.nz/#!ZMB2yYiD!USlZBgZ1uS1qN-ib0VuZOkzUAwh5O-8rB3HTc4lAoss

2. Dowload the OFW from here: http://www.ps4news.com/ps3-hacks-jailbreak/sony-ps3-debug-test-dex-firmware-4-30-update-now-available/

3. Open the Deltapatch.exe

A. On original file: chose the PS3UPDAT.430.001
B. On xDelta patch: dex430cfw.xdelta
C. Check on both option: Keep original and checksum

4. Now press apply patch and now the new CFW will be create with not brick. Enjoy!!!

[Register or Login to view code]

Below are the verification checksums, as follows:

  • 4.31 CEX patched update4 PUP: a1781d38dc5f3d54830615ed6b6c3870
  • 4.30 DEX patched PUP: f59a4247449be038fea354f3462c3af6

Finally, from Cyberskunk: First, nice job Miralatijera. Second, It is true 4.30 REX has been ready for a few weeks now and it does use a patched 430 lv1ldr instead of the 421 lv1ldr that does not have the check. I read a single sentence on ps3 dev wiki that stated there was a check in lv1ldr with no other details about it.. so i had a look.. found it.. patched it.. Job done. So guess i would have to give credit to the person that shared that snippet of info to work from.. Thanks


PS3 CFW 4.30 DEX by MiralaTijera for OFW & CEX2DEX Converts Out

Stay tuned for more PS3 Hacks and PS3 CFW news, follow us on Twitter, Facebook and drop by the PS3 Hacks and PS3 Custom Firmware Forums for the latest PlayStation 3 scene and PlayStation 4 scene updates and fresh homebrew PS3 Downloads. Enjoy!
Sponsored Links
Sponsored Links

Comments 111 Comments - Go to Forum Thread »

• Please Register at PS4News.com or Login to make comments on Site News articles.
 
#51 - BOBJONES2013 - 105w ago
BOBJONES2013's Avatar
thanks was looking for that answer

#50 - DEUSC2D - 105w ago
DEUSC2D's Avatar
You can just disable Core or get nosearch flag working if you are going to be running games via USB.

I currently can not support this CFW as I need to repair my test console from fooling around with DEX (not this CFW related) before I can use this again. I'm also not sure what the dev intends on doing with this CFW and my Spanish is not getting any better.

#49 - accurateguy - 105w ago
accurateguy's Avatar
Am having issue after i update my core to 2.7.2 my usb games did not appear again on backup managers, please help me out thanks for the support in advance

#48 - DEUSC2D - 106w ago
DEUSC2D's Avatar
Hi, you must copy all the content from inside of the "Core 2.7.2" folder to the root (E:\root) of your USB device. The folder named "flags" needs to be at the root (E:\flags) of your USB device as well e.g. E:\flags with the boot_otheros flag inside of that folder will boot into otherOS. The PS3 will read it like this ==> /dev_usb000/flags and whatever flag you put in to that folder.

#47 - Doni - 106w ago
Doni's Avatar
hi people I have a few questions, yesterday I installed the 4.31v2_CHX cfw.

From the core folder I have the whole folder "Core 2.7.2" in the root of usb copied along with the flags. E:\CORE 2.7.2\flags

Thus, the LED will flash the ps3 in several colors, it also starts the normal cfw, but my problem now..

1. The flags are active now or do I activate?
2. Do I have to enable somewhere bd emu, because i got a broken laser.

Sry for the google english^^
mfg doni

#46 - DEUSC2D - 107w ago
DEUSC2D's Avatar
The dev MiralaTijera, is already making update 8. He claims that all games with be payable with no disc. Compiling a .PUP is not necessary for updates 5-7.

Please keep in mind that this is a WIP and if you have any issues just try to be patient.

#45 - abdullahjwz070 - 107w ago
abdullahjwz070's Avatar
Wow this is nice bro

#44 - okc8200 - 107w ago
okc8200's Avatar
Hi DEUSC2D. Thanks for the update 4 pup! This update 7 - core 2.7.2 is giving me major problems though. Can you make a pup for me?

#43 - DEUSC2D - 108w ago
DEUSC2D's Avatar
To: seeman, this CFW does not need game fixes.

Download: Update 7 / CORE 2.7.2 (15.27 MB) / Core 2.7.2.rar (15.08 MB)

How to install Update 7 / CORE 2.7.2:

  • Connect a pendrive (FAT32 formatted) to PC.
  • Extract the content from "Core 2.7.2" folder to your pendrive.
  • Connect your pendrive to --> /dev_usb000 (closest usb port to bd-drive)
  • Turn on your console, once done CORE 2.7.2 will be installed.

Note: To use flags, copy them from the "All Flags For CORE 2.7.2" folder the flags folder on your pendrive with CORE 2.7.2 (only use the flags you need).

Summarization of flags:

  • Bdemu, If you have the reader controller you have dead or no reader and, therefore, do not npdrm works, enabling this flag, the console will behave as if you had reader. If you do not plan to change your desktop, you can install this flag in the flash through another flag called "installbdemu" not to depend on the pendrive. It has also been rewritten and now has a more accurate and improved.
  • Installbdemu, If your drive controller is dead, use this flag (with the Core Assets) to permanently install the flash BDemu.
  • Enableqa enable QA Flag directly in 4.31.
  • Removeqa, disables QA Flag.
  • Dumpnandflash, makes a full dump of NAND console, which will help us to recover the console of a full brick, with a flasher, of course, because if you have a full brick, CORE will not start.
  • Dumpnor, same function as above, but dedicated to consoles with NOR memories.
  • Dumpdevflash, Dumps the dev_flash (3) in the root of the pendrive.
  • Dumplv2, As stated, makes decrypted LV2 dump.
  • Dumplv1, Same operation as above, but this makes a dump (lv1dump.bin) of LV1 (16 MB).
  • Fullramdump, I think it goes without saying that it serves.
  • Flashnor, If there is a file called "nordump.bin" in the root of the pendrive, the MT will flash the NOR. Beware of this option could be dangerous if you do not know what you do. The flashing process takes around 20 minutes.
  • Anotherlv2, With this flag we can experience with our LV2 modified and tested for correct functioning well without flash this in memory of the console, thus saving many complications and risks of brick. Simply copy the root of pendrive LV2 self from modified and enable this flag, the console will start with the LV2 the pendrive.
  • Clear_bootparam, clean records (Cache and Logs) and "waste" that can leave other flags in use, to have the console as clean as possible. (Thanks for the clarification MrMento ^ ^)
  • Setup_flash_for_otheros, prepare the flash partitions to install OtherOS (Linux).
  • Install_otheros, Use petitboot to install Linux on the console. (Required files contained in the folder "OTHEROSFILES" pack of Update7)
  • Boot_otheros, If you have Linux installed on the console, turning this with this flag in the pendrive, Linux will automatically start at the beginning of the console. CORRECTED small bugs, now runs everything correctly.
  • Nosearch If you want the console boot even faster, besides solving the synchronization of the controls at the beginning of the console, but regardless of the flags in the search for new functions USB enable this flag once and will be installed Standing in the flash. You can restore it by installing the included in the Update7 ResetCore.pkg.

CORE 2.7.2 Changelog (rough translation): pastebin.com/xx4x4kWH

CORE 2.7.2 with major improvements changelog: pastie.org/private/amlvvedqonevm80f7qrcw

  • Deleted and exitfactory enterfactory flag (power + eject works without dongle and you can leave the factory with the 2nd exit Lv2diag always) bone that were useless
  • Added flag "installbdemu" permanently installed bdemu flag causes the bdemu always be loaded without connected or flag setting usb
  • Now the core is automatically installed on the dev_flash to become permanent execution
  • Bdemu completely rewritten, is now more accurate and causes less problems.
  • The core 2.7.2 installs on dev_flash now (is automatic the first time I extort)
  • Added flag "nosearch" permanent flag adds a core to keep you from usb to the console and start the USB core and load without permanent work options with this greatly improves startup time to almost original theme synchronizing the controls
  • Added flag "flashnor" flashes using the normal root file in pendrive nordump.bin / dev_usb000/nordump.bin (you can watch it bricking if you do not know what you do not LOOK this flag)
  • deleted and payloaderdev Payloader flag, (and all managers have their payload to get mine when the managers are more up to date?)
  • Fixed boot_otheros the flag, now loads fine
  • Fixed collision with IRIS MANAGER code no longer asked to restart ..
  • Added flag "dumplv1" creates a file in the root of the pendrive lv1dump.bin with a dump of lv1 16MB

What's Cool:

  • As nocheck flag disables search permanently on usb I created a pkg to reset the permanent flag "nosearch"

Instructions:

  • Put the folder in the flag's flag that querrais start and what you put into the right usb console everything and export
  • Flags are empty files with no extension are created in the folder usb flags
  • From the core of this review is ongoing in flash, the update method is run resetcore pkg (if you have enabled nosearch) and turn off the console, enter the new cellftp.self (assumption 2.7.3) in the folder / updatecore of usb and make magic.

EYE

  • The homeless is bdemu reader READER COMPLETE WITHOUT ie no broken lens, if you have broken controller. This is slightly better than the same compatibility APP_HOME games but is better than using a disk.

This update is only, you do not have any other previously installed... and if you had an update not care too.

How to deactivate CORE 2.7.2:

  • Simply extract the contents from "DEACTIVATE CORE 2.7.2" folder to your pendrive.
  • Connect it to /dev_usb000 (closest usb port to bd-drive),
  • Turn on your console, once done CORE 2.7.2 will be deactivated.

Note: To restore CORE 2.7.2, install the ResetCore.pkg from the "TOOLS PKG" folder.

Thx:
MiralaTijera, CFW 4.31 creator.
Isma_OMG, info/support provided.

#42 - seeman - 108w ago
seeman's Avatar
thx a lot... i think i will give this cfw a try !! btw does iris manager have the 4.31 fix also???

 

Sponsored Links

Sponsored Links







Advertising - Affiliates - Contact Us - PS4 Downloads - PS4 Forums - Privacy Statement - Site Rules - Top - © 2015 PlayStation 4 News