PS4 News on Facebook! PS4 News on Twitter! PS4 News on YouTube! PS4 News RSS Feed!

Home PS4 News - Latest PlayStation 4 and PS3 News

November 6, 2012 // 3:44 am - Following up on the PS3 Factory 3.56 with Flasher news, French PlayStation 3 developer raymanvtwo has shared a way to install Rebug PS3 CFW 4.21.1 on any version PS3, however, it requires a PS3 Hardware Flasher, will format your HDD and may result in a permanently bricked console so be WARNED!

Below is a rough translation of the process, as follows: You will need just a flash, great care, attention and rigor.

This method will format the hard drive of your PS3, make sure to recover your important data. Also, you incur a risk of irreversible brick in case of bad handling. Neither I nor PS3-Addict can not be held responsible. If you are not able to follow this tutorial to the letter, thank you spend your way!

Firstly, ensure the validity of your dump, flow rebuilder is the best in the field. Also check that all your fichiez is a different size of 0 bytes (including bootloader_0). If there is a problem, it will help you out.

Now that you have your dump, to see if the offset 200 if you or IFI FI.I with HxD as hexadecimal editor. If you IFI, go to the next step. If you FI.I, open flow rebuilder Select "Byte reverse and extract a NOR dump file." and then made your dump "execute operation". If you get an error is that your dump is not good. Before you dump, you must make new bytes reversed under penalty brick your PS3 but it will be easily retrievable.

Now, you need winskeet and patch (here and here or mirrored here). Winskeet open, go to the tab "patch" in "input file", select your dump file and select the patch. Txt file previously downloaded the archive. Made apply and save your dump patched.

[Register or Login to view code]

Now write your dump patched (do not forget to do it again if you had reversed bytes FI.I at the top). Now your PS3 Decomposition Systems is no longer able to work, do not worry, this is normal. Go to the recovery menu (it may be that your PS3 shuts herself at the first attempt, the second should succeed). Install CFW Rebug 4.21.1 (available via the "system update").

If after several attempts you are unable to install Rebug CFW 4.21.1, format the HDD, then reinstall the switch on the PS3. On a USB drive to FAT32, put the. Rebug 4.21.1 CFW PUP (available here and here) in x: \ PS3 \ update and rename it to PS3UPDAT.PUP. You will get a message asking to connect a controller and press the PS button, then follow the plug your USB drive, make sure there is no disc in the drive BR, then press START and SELECT at the same time for 3s and follow the instructions to install your CFW. Enjoy.

PS: This method has been tested with the Rebug CFW 4.21.1, if you use another CFW, it will be at your own risk. This method has been tested on a PS3 with the metldr "anti CFW 3.55", it should work on any console. Thank you to give me a feedback on the effectiveness of this method and possible problem. Thank you also include PS-addict and I and keep the links given in this tutorial if you publish on your sites this method.

Finally, thank you to the work of the "Three Musketeers" and the Rebug team has allowed me to patch my PS3.

From Cyberskunk: Tested on my 3K series.. DOES NOT WORK (didn't think it would)..

From Rogero: Tested here also on a 3K machine, didn't work, it bricked... metldr .2 and lv0.2 won't be easy to bypass....


Install Rebug PS3 CFW 4.21.1 on Any Version PS3 with Flasher

Install Rebug PS3 CFW 4.21.1 on Any Version PS3 with Flasher

Install Rebug PS3 CFW 4.21.1 on Any Version PS3 with Flasher

Follow us on Twitter, Facebook and drop by the PS3 Hacks and PS3 CFW forums for the latest PlayStation 3 scene and PS4 Hacks & JailBreak updates with PlayStation 4 homebrew PS4 Downloads.



#144 - tatarjimlim - March 26, 2015 // 12:23 pm
tatarjimlim's Avatar
I want to try this

#143 - topmusic - January 23, 2015 // 3:59 pm
topmusic's Avatar
Great job, need i also a Jig to downgrade from 4.31 OFW to 3.55 OFW ?

#142 - san - December 12, 2014 // 4:46 pm
san's Avatar
I have one with 3.56 min see, that will be the right ??

#141 - revolution gms - November 24, 2014 // 10:23 pm
revolution gms's Avatar
will be running.. I will try here.

I am with this ps3 with 3:56 manufactures and ta mistake of asking with 9.99 in the update. will be that your method solves it?

I am with this ps3 with 3:56 manufactures and ta mistake of asking with 9.99 in the update. will be that your method solves it?

I am with this ps3 with 3:56 manufactures and ta mistake of asking with 9.99 in the update. will be that your method solves it?

#140 - MrBGA - October 29, 2014 // 3:52 pm
MrBGA's Avatar
OMG i cant get this 3.56 done.. lol

i have min version 3.56 PS3 slim here date Code1a, can i still patch with the 4.65 flashtool like i would if i was downgrading to 3.55 and then the rebug instead of rogero downgrader?

I just want to be sure im patching it correctly.. the tut seems to suggest this. any help would be nice. When i check the dumps with flash tool it says needs 4.xx patchset.. how can i do this?

#139 - timartinelli - November 13, 2013 // 10:40 am
timartinelli's Avatar
Friends,

I have a 2511A minimun 3.56, he is currently in OFW 4.50.

Can I use this tutorial and apply the Rogero CFW 4.50?

#138 - kumar512 - October 21, 2013 // 12:54 am
kumar512's Avatar
3.56 factory/service mode

#137 - ps3fire4ever - June 19, 2013 // 10:56 pm
ps3fire4ever's Avatar
Quote Originally Posted by imedox View Post
I messed up, I was at E3 cfw 4.30, may ps3 minichek 3.56 I put 999 downgrade of Rebug rex to go Rebug 4.21.1 Rex

my ps3 Blocked on factory 9.99, I can not go back to 3.55 because the minichek version it 3.56 how to unhash syscon bank in factory mode? or how to pack E3 4.30 pup to 9.99.

Hi imedox, were you able to get the solution to this problem? I have the same issue with my Console.

#136 - Nnoitra - May 24, 2013 // 6:05 am
Nnoitra's Avatar
Cech-2504a can someone help me with my doubt i want to try to make this to my ps3?

#135 - akimazaki - May 23, 2013 // 10:41 am
akimazaki's Avatar
You need to know what model cech type