PS4 News on Facebook! PS4 News on Twitter! PS4 News on YouTube! PS4 News RSS Feed!

Home PS4 News - Latest PlayStation 4 and PS3 News

72w ago - Today Spox_2 (via thenat1) detailed a PlayStation 4 reballing APU (CXD90026G) in PS4 with details below and some pictures available HERE.

To quote, roughly translated: Hello! As the first service in the world, and thus in Poland made the impossible! We proudly present a new gallery showing the full process uBGA heart PS4 console - An AMD APU Jaguar.

Scope of activities:

1. We buy the PS4 console on the European release (date 29.11.2013r. in Poland)
2. Removing the APU system based on IPC (CPU & GPU - AMD system Jaguar) from the motherboard
3. Reballing the APU on a new solder alloy Sn63/Pb37 (unfortunately does not have at the moment, sit under a BGA. We made all the marbles own - it took 3 hours but worth it!)
4. Installation of the APU system based on IPC
5. Mounting motherboard PS4 console
6. The test result of the device ended POSITIVE!

Console after made uBGA and replacing thermal paste to Arctic Silver S runs a lot quieter during long hours of gameplay in KillZone Shadow Fall

  • Heart PS4 console - CXD90026G!
  • Purified APU in PS4
  • The cleaning process APU
  • Removing the PS4 console
  • Removing the drive in the PS4
  • Dual Shock 4
  • New solder joints Sn63/Pb37 at APU
  • Motherboard PS4 without APU
  • Motherboard PS4 lower part
  • Motherboard PS4 upper part
  • Preparation for the dismantling of the
  • Reballing APU on the foot Sn63Pb37
  • Our studio
  • Removed APU
  • Positioning APU in PS4 waiting for installation




PlayStation 4 Reballing APU (CXD90026G) in PS4 by Spox_2 Detailed

PlayStation 4 Reballing APU (CXD90026G) in PS4 by Spox_2 Detailed

PlayStation 4 Reballing APU (CXD90026G) in PS4 by Spox_2 Detailed

Stay tuned for more PS3 Hacks and PS3 CFW news, follow us on Twitter, Facebook and drop by the PS3 Hacks and PS3 Custom Firmware Forums for the latest PlayStation 3 scene and PlayStation 4 scene updates and fresh homebrew PS3 Downloads. Enjoy!


  • Sponsored Links




#10 - MaxLukas - 35w ago
MaxLukas's Avatar
Hello, could you look at pictures of the motherboard to show what is responsible for turning off the console? I console when started, then clicks as disabling and off.

Tried to change the power supply too, put another motherboard everything works. What happened to my motherboard don't know.

#9 - mushy409 - 71w ago
mushy409's Avatar
Personally I think Sony have done this on purpose... SPI flash are pretty common in most devices. Dumping the console FW isn't the challenge, decrypting/extracting it is a different story.

We'll see what's in store. I would imagine the same could be possible in the future - rewriting the coreOS section of flash to unbrick/restore the system.

Still waiting to get my hands on a PS4, there's none left here in the UK

Just looked at those screenshots, the second flash can be ignored - USB-SATA controller FW (also present on the PS3 slim JTP-001 & JSD-001 boards)

The 256Mb MXIC SPI is the device of interest

#8 - rodq - 71w ago
rodq's Avatar
Definitely dumping MX SPI flash could be done easier and cheaper! lmao

#7 - Brenza - 71w ago
Brenza's Avatar
Quote Originally Posted by segobi View Post
So what exaclty do you think is great about someone dumping a SPI flash ? lmao

Definitely more interesting than your post! lmao

#6 - segobi - 71w ago
segobi's Avatar
So what exaclty do you think is great about someone dumping a SPI flash ? lmao

#5 - PS4 News - 71w ago
PS4 News's Avatar
More pics for the main article above...

#4 - PS4 News - 71w ago
PS4 News's Avatar
Following up on the recent PlayStation 4 Reballing developments, today Italian PlayStation 4 developer -Criscros- (aka criscros1989) reports he has dumped the Macronix MX25L25635FMI-10G and Macronix MX25L1006E PS4 NOR flash memory ICs (OFW 1.05) using SPIway and a Teensy++ with a ZIF socket.

HERE are some pictures, and to quote, roughly translated: I can communicate with much happiness that I have just dump the NOR flash memory MX25L25635FMI-10G Macronix, Macronix MX25L1006E and the new home console Sony PS4.

Everything was done by unsoldering the 2 memories and read with SPIway the Teensy++ via ZIF for power that I used the Teensy++ using the same controller without problems.

  • Here a picture of the motherboard PS4 SAA-001
  • The 2 Flash memory
  • Teensy++ motato on Flash
  • SPIway action
  • An analysis of NOR-10G Macronix MX25L25635FMI
  • and one of Macronix MX25L1006E

As you can see you can already distinguish the Magic Headers.

A special thanks to Judges for SPIway and Zeruel85 for taking me on this adventure.

More PlayStation 4 News...

#3 - thenat17 - 72w ago
thenat17's Avatar
Spox_2 and me (thenat17) are two different persons !

i'm just the admin there.

#2 - SwordOfWar - 72w ago
SwordOfWar's Avatar
This is nice, but I'm not sure getting this done would be worth the money (and shipping) that any company would be willing to charge for it.

You should wait the standard 1 year warranty out first (or extended warranty if you buy that), because if it fails in that time something was seriously wrong with it, and Sony will have to replace it.

If we look at the PS3, it was the original units that were hotter and even then most people didn't get the YLoD until 5+ years later. It was also the fact that the original units had more features which is why people wanted to fix them rather than buy a new console.

So if we take a look at the PS4, it's already running cooler than the PS3 and it is very unlikely that a new PS4 model will see a reduction in features. It's selling incredibly well, it's already cheaper than the competition, and it doesn't have any backwards compatibility this time so you won't lose anything functionality wise from a new model (I think years later they will drop the capacitive power buttons and probably add a manual flip open BluRay drive to make it even more cheaper, but that's about it).

Judging by this information, I'd say a thermal paste upgrade (along with a thorough inside dust cleaning) after your warranty plan expires should be enough to get you through the generation.

But all things said and done, the reduced power consumption and heat of the PS4 compared to the PS3 means overheating shouldn't be as bad a problem, or at least as widespread as it was with the original PS3 units.

#1 - PS4 News - 72w ago
PS4 News's Avatar
More pics for the main article...

 











Advertising - Affiliates - Contact Us - PS4 Downloads - PS4 Forums - Privacy Statement - Site Rules - Top - © 2015 PlayStation 4 News