Hey there.

So... you use an ad blocker. That's cool. Sometimes we do too.


But without ad revenue, we wouldn't even be here. And we might not be here much longer.

Please disable your ad blocker and click to continue.

Page 1 of 3 12 ... Last
  1. #1
    simes6600 Guest

    YLOD/Heat Gun temp advice pls help?

    got a YLOD on my old 40gig PS3. have thermal compound at the ready, and have borrowed a Black & Decker BD1600 1400w heat gun. the gun is working great, but was wondering what the operating temp of this thing would be?

    gilksys guide says hold the heat gun about an inch from the motherboard with a temp of 350C from the gun.

    any tips on how far i should hold the heat gun from the mb would be very much appreciated, afraid i'll melt it into oblivion.

  2. #2
    TheShroomster Guest
    1400w does not really tell you what temp the gun is running which makes it tricky. i use a ryobi heat gun which has temp settings i run mine at about 775F and i built a jig which holds the gun approx 3/4 inch from chips. it all about trial and error with individual guns. start slow and then if it still wont boot try a longer cycle. just remember to warm the board before reflowing so it does not warp.

  3. #3
    adr990 Guest
    Just dissasamble the PS3. Remove the Therminal paste and heatsink, clean them. Get some (rubber) stack ups (pillars w/e) and put the mother board in the oven.

    There is some tutorial around, this will reflow your whole PS3 board. Let it cool off, don't move it!

    Then get some Silver arctic paste, and put it on the GPU/CPU, spread it to be as thin as you can.

    And the PS3 should be.. better than new, as Sony didn't do it right.

  4. #4
    TheShroomster Guest
    I strongly disagree with the oven method a little too long in the oven and you will destroy the board.

  5. #5
    HeyManHRU Guest
    If you do happen to use the oven remember to read some guides first, don't just stick your mother board in the oven at any temperature.
    I would suggest you use the heat gun method first, since it's the safest and easiest thing to do.

  6. #6
    elser1 Guest
    i agree with shroomster.. you would have to be an idiot to stick your ps3 mobo in the oven.. LOL there are all sorts of materials on there and they all have different melting points.. it really is stupid to try this!!!

  7. #7
    simes6600 Guest
    umm, nah, the oven fix is only for experts

    i used gilksys guide exactly, approx 15 secs on each area about an inch away from the chips, and no more YLOD, but for how long is anyones guess. there is a local computer vendor who does reballing, waiting on a price for future reference.

  8. #8
    HeyManHRU Guest
    The best fix for the YLOD is buying another PS3.

  9. #9
    jamesnesc709 Guest
    also this you can get it fix by reballing it.

  10. #10
    mushy409 Guest
    Using a heatgun is probably THE worse thing you could do. Yes it may work for a few days, but in reality you're just doing more damage to the already stressed components.

    Have it looked at by a professional or somewhere that offers a reflow/reballing service. YES it is $$$ but how much is a new PS3? How much is a 2nd hand one? How much do $ony charge for repairs? I think 40-50 is a reasonable price, and IF done properly your console will live on for a fair few more years.

Page 1 of 3 12 ... Last

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Log in