Hey there.

So... you use an ad blocker. That's cool. Sometimes we do too.


But without ad revenue, we wouldn't even be here. And we might not be here much longer.

Please disable your ad blocker and click to continue.

  1. #1
    Join Date
    Oct 2013
    Posts
    3

    PS3 urgent unbrick help?

    cech2003b dyn001 mother board , i have connected to the sbe from the flasher to tristate on ps3 it powers up. i added my bkpps3.bin to minisd card and now everytime i try and flash by pressing the start button light number 1 ,5,6 lights up blinks please help.

    by the way i re-ordered new cable just to make sure and be on safe side until then please advise thanks

    i opened up my micro-sd card and here's what i see:

    log inside of it, start logging... program PS3 BIOS. fail to initialize PS3 BIOS.

    things i tried:

    i put 1 leg on top of the clip gently , did not work
    i held it down with fingers did not work
    and now i purchased a clamp , did not work

    all methods give me flashing lights 1 ,5 ,6 blue lights

    is there a possibility my cable gone bad?

  2. #2
    misiozol Registered User
    Double check all soldering points , Have you write something to flash ? Does consoles boots up if you desolder everything ?

  3. #3
    Join Date
    Oct 2013
    Posts
    3
    i set switch up rest down!!! then power up and try press start and it gives me blinking lights for 1,5,6 inside the micro-sd i se log program PS3 BIOS. fail to initialize PS3 BIOS.

    i have 2 valid backup dumps + i patched it and transfered to sd-card.

    i am trying to fix the 1,5,6 flashing issue.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Log in