Results 1 to 9 of 9

Thread: PS3 slim stuck on 3.56 v1 (Error 8002F2C5) help?

  1. #1
    boazoa Guest

    PS3 slim stuck on 3.56 v1 (Error 8002F2C5) help?

    I have a PS3 slim stuck on firmware update 3.56 v1, that refuses to update with any recent firmwares. I've been wanting to throw it away, but i thought I'd ask you guys, to see if you had any solutions.


    Firmware 3.41-4.11 on Usb
    4.11 Firmware burned onto a disk
    Few Custom firwmares

    Gone to the recovery menu and rebuilt database, tried upgrading from there, and restoring the system, none of those have worked and just return error 8002F2C5.

  2. #2
    natedogg20050 Guest
    are you sure that you are on the JFW V1 [HadesFirmware]

    but if you are not like me you stuck and you can get only down with e3 flasher.

  3. #3
    HeyManHRU Guest
    You could try re-formatting the HDD.

  4. #4
    justev Guest
    That update is looking for the correct harddrive for that ps3, but so many people had errors with it sony quickly updated it to v2.

  5. #5
    racer0018 Guest
    You can try to format the hard drive and then install 3.56 ver. 2 in recovery menu. Thanks and let us know.

  6. #6
    mushy409 Guest
    Just to let everyone know... I've had 3 consoles in 2 weeks BRICKED after an attempted E3 downgrade. Ended up using my Progskeet to sort out. My opinion isn't great of that specific product - just sharing my experience

  7. #7
    racer0018 Guest
    I agree but a lot of people will not get the progskeet because of the soldering or having to put all that money into making it solderless. But I have had two go brick with the e3. I also used the progskeet to fix them.

    I have one e3 that sits in a box and has never seen a ps3. Just stole the clip pun of it for a guy that wanted it. So yes mushy I do have to agree that the e3 isnt the best choice.

  8. #8
    tri Guest
    3.56 v1 is SONY issue, it has some bug so make some EEPROM of PS3 not working well. you will get error even you update or downgrade to anykind of FW.

    Yes, You can fix this problem !! its easy !!! you can use E3 Flasher or Progskeet, but i'd prefer using Progskeet.


  9. #9
    dyceast Guest
    Yep.. The issue was Sonys fault, when you changed hard drives while on 3.56 v1,... The only easiest way, is if you are lucky enough to have the original Hardrive you updated to 3.56v1 with, you then put that HDD in, and then update to 3.56v2? If not, you can either reflash with progskeet or if under warranty, send it to sony to fix..

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts