Thank You for anyone that can shine a light on my issue. The console is a phat nand system. I have a bad BD drive. Takes the disc but will not load it. And was on CFW 3.55 and used the card reader to get into Factory Service Mode then did the remarry plus downgrade to 3.41.Sponsored Links
I am in Factory service mode, got NG error something about P-block. Than tried it with downgrade to OFW 3.30 same thing. Did that a couple of times. Error with NG. Then changed Logic board thinking maybe the board was bad. NG again. So I was thinking about going back to 3.55 OFW. But now system will not boot into menu or recovery menu.
I tried to get out of FSM all I get is turn on 10 seconds turn off no lights blinking but a solid green so its not an overheating issue. I also checked my HDD and even reformat it to FAT32 on PC..I also tried to use the Lv2diag.self (2nd file) to get out of FSM.
So its stuck in FSM with OFW 3.30. but I can run the remarry process just keep getting error. but am not able to boot into XMB or recovery menu.
Any explanation would be grateful.