09-25-2010 #1ordimans Guest
Impossible to flash my key (Atmega32u2)
I have a problem with FLIP Software, when i want to update psgroove. I received a message: "blank check fail at 0x0000"
Please, if somebody can help me and give me a good answer. (i know how use flip...)
i have this key: http://www.ps4news.com/forums/attach...7&d=1285238616
eclips3 or ps3key software don't detect this key.
09-26-2010 #2Sachka Guest
I hope you solved your problem... Now I would like to offtopic a little bit, what do you mean by "it work now, i cheat with drive, and i put in the up position. and now i can launch." what did you do to make it boot?
09-26-2010 #3aamir007 Guest
You've got a PSJB so you probably can't update it to PSGroove not sure if anyone else has and how they got it working.
09-26-2010 #4Sachka Guest
No no... I don't have any official thing i got a clone that I got from a friend who doesn't know how or who made it?
It's a VERY small short and blue usb drive, like a little bit of plastic and the whole metal port.
09-27-2010 #5wlcina Guest
AFAIK there is no way to update some kind of clones of "PS3 Jailbreak".
I would dismantle the your key, and identify the chip inside, that may help you find the correct update tool. But if its working yet, dont do anything. Last groove update isnt worth of destroying key (by dismantling).
09-27-2010 #6Sachka Guest
its an Atmega chip, I found it! a "Let's Relax" clone the smallest one I've ever seen.
10-05-2010 #7CBY Guest
I have the same flash key metioned in this post.
My computer and the FLIP application detects this flash key as the ATMEGA32U2
I have tried various types of .HEX including:
These either cause the PS3 to not boot or display an Unrecognised USB message.
Which is the correct .HEX to use?
I have firmware version 3.30 does this need to be upgraded to 3.41?
Any help would greatly appreciated.
10-05-2010 #8GrandpaHomer Guest
10-05-2010 #9CBY Guest
Thanks mate, I thought this may have been an issue. I will update to 3.41 after work.
10-05-2010 #10GrandpaHomer Guest