Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: How do I start the PS3 jailbreak help?

  1. #1
    Onuy3k Guest

    Question How do I start the PS3 jailbreak help?

    i checked system and i'm able to go back to 2.7. what do i do from here plz help

  2. #2
    racer0018 Guest
    You need a hardware flasher to downgrade the ps3. This will have to be soldered inside the ps3 to dump the nor or nand chips. Then patch it and write it back.

    When that is done take and put it in service mode and put the modded files on the USB to write your firmware. Or you can pay someone to do this for you. I do downgrades it is in the for sale section.

    If you have a nor chip you can use the e3, progskeet or the teensy 2.0++

    If you have a nand chip use the progskeet or the teensy 2.0++. Thanks.

  3. #3
    Liongooder Guest
    Hello Onuy3k welcome to PS3News, next time try to post in the Help section so everyone can see it & help you right away.

    First off you need to check your current Firmware if its above 3.55 then you need to downgrade using a hardware flasher.. after that upgrade to 3.55 OFW or CFW from here you can choose to install either Rebug 4.41.2 CFW or Rogero 4.40.

    Here is this guide on how to install a new CFW:

    1. First Download QA Toggle pkg
    2. Copy the file to the root of your USB or external HD
    3. Insert your USB/External HD to your PS3
    4. On your PS3, go to “Install package Files” and install the QA Toggle PKG
    5. Once installed, run the “Rebug Toggle QA” on your PS3, (The screen will go Black and you will hear 2 or 3 Beeps and when finished it will go back to the PS3′s XMB, and if error comes up, just repeat this step.)
    6. Go to “Network Settings” (do not open it) then all at the same time, press the following key combo : L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_down.
    7. If the QA Flag was done correctly, you will see Edy Viewer, Debug Settings, and Install Package Files.

    Now to system update assuming you chose one of the above CFW,download the PUP

    1. Create a folder on your External HDD & rename it to PS3
    2. Create a another folder inside the first one & rename it to UPDATE (must be in cap)
    3. Put the pup you downloaded & rename it to PS3UPDAT so it can be like this PS3UPDAT.PUP

    Now connect you External HDD to the PS3 in the right USB the one next to the BD & eject any BD or Disc inside the PS3 go to system update, choose update from storage media, follow the instructions & voila.

    Have a nice day.

  4. #4
    JeoWay Guest
    Since your base firmware is 2.70. Your console is downgradable. If your on a firmware past 3.55, you will need to a flasher.

    From there, once downgraded to 3.55, I recommend installing Rebug Lite version (Update from 3.55 to the 4.XX Rebug Version after toggling QA)

  5. #5
    Onuy3k Guest
    I DONT need flasher so what now

  6. #6
    JeoWay Guest
    Are you on version 3.55?

    or lower?

  7. #7
    Onuy3k Guest
    ya 2.7 i am currently updated to 4.41

  8. #8
    JeoWay Guest
    Your base firmware is 2.70 but your on 4.41. You can downgrade to 3.55 (for jailbreak), but you NEED a flasher due to being above 3.55
    There is currently no "actual" way to jailbreak and/or downgrade a 4.XX console without flashing.

    So you will need a flasher.

  9. #9
    Onuy3k Guest
    so i can't cfw? i heard there was new ways to do this

  10. #10
    JeoWay Guest
    They have 4.XX CFW out there, but you need to be on 3.55 to install it. So if you want to jailbreak 4.XX, you must downgrade to at least 3.55 (or lower) to install a jailbreak.

    No 3.56+ OFW Jailbreaks. Sorry for the bad news.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts