Thread: Bricked PS3 - Any hope?
06-21-2010 #1footylad Guest
Bricked PS3 - Any hope?
Some of you may remmember that I have a bricked machine due carrying out the Swapmethod trying to basically reinstall the same FW (Debug 2.01) over itself to see if some of the unworking features would activate. This seems to have either wipped of the Nands and the console turns itself off after 10 Seconds after activity from the HDD Light/USB Light if one is inserted. This is Pre-Restore mode around 2 years ago now and Its just gathering dust and i was wondering if this could be fixed/is my only solution getting a new motherboard from a working machine. I have done all of the following to no avale;
1 - Held Power Button for 3 Beeps
2 - Put a HDD of a working PS3 into it - Nothing
3 - Put a USB in with PS3/UPDAT or /UPDATE with a PUP in - Nothing
4 - Extracted a PUP and put in this folder / root - Nothing
5 - Used the JIG Files and renamed usb to /usb_000/ as in the JIG
6 - Put a disk in - Nothing
7 - Tried to boot it into Linux using SLAX Bootable - Nothing
Are there any other solutions other than getting an Infectus or New board for this console?
Below is a Video of what happens to my console precisley as this chap has also the same problem using the same "swap method" brick.
The name of the USB was supost to say: /dev_usb000/ Sorry. - But the JIG obviously must have a starting command as before load there is a parameter in the log: manufacturing updating start
07-24-2010 #2CJPC Guest