Results 1 to 5 of 5

Thread: Blu ray drive swap help?

  1. #1
    elser1 Guest

    Blu ray drive swap help?

    hi i got a launch model 60gig ylod off ebay and fixed it today.. it works now.. the buray drive is gone.. i have another 60 gig same model with no pwer supply.. can i just swap the whole drive assembly or do i have to do the remarry thing.. thanks for any help.


    also is ofw 3.55 thank god!!

  2. #2
    Natepig Guest
    If the one you have fixed has its logic board intact, then you can use the drive minus the logic board from the other. If it has no logic board then you must take the drive plus logic board from the other, then remarry to the fixed one.

  3. #3
    elser1 Guest
    kool.. i take it the logic board is the little board on the underneath front of the housing of the drive.. so i just swap these to the working bd drive and install it and it will be fine?

    hope so a lot easier than remarry..

  4. #4
    Natepig Guest
    yes if you have two of the same model its easy peasy.

  5. #5
    elser1 Guest
    thanks natepig...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts