Hey there.

So... you use an ad blocker. That's cool. Sometimes we do too.

But without ad revenue, we wouldn't even be here. And we might not be here much longer.

Please disable your ad blocker and click to continue.

Page 6 of 9 First ... 567 ... Last
  1. #51
    Anger007 Guest
    this remarries the drive to the console - it does NOT create the drl files (files required to play blu ray movies) so if your drl files are different then you get that error and there is no direct fix for it unless you know the blu ray movies played in the drive. (drl gen can make drl files if you know the details about what discs have been played by the drive however if you are like me and don't have this information then your stuffed.)

    theres a pkg tool for devs that will only run on jfw 3.56 ma that can get the information from the drive about which discs it has run however i don't fancy being locked to 3.56 forever so i, like most others, am going to have to live without bluray playback for a while longer.

  2. #52
    flopes Guest

    Only play one blu-ray movie

    The only blu-ray film that I put the console before upgrading to CFW was the original blu-ray (Queen Rock Montreal & Live Aid). I still have it!

    How can I generate drl files? Tutorial?


    I solve the problem! My ps3 can play all my Blu-rays!!!

    I used the DRLTools (DRLGen): http://www.ps4news.com/PS3-Hacks-Jai...k-fix-arrives/

    And used FTP to backup and copy the DRL files!

  3. #53
    metzen Guest
    Thanks for this tidbit of information! I've got another drive on its way and will have to try this when it arrives! I had a bad laser so they are replacing it for me and will then try the process again.

  4. #54
    madrigal77 Guest
    I got a pink "NG" like the picture below. What does that mean and how do I fix it?

  5. #55
    Foo Guest

    Remarry Bluray Drive on Linux by Glevand


    You will new decrypted EID2 data. How to get it on Linux is described here: (ps3devwiki.com/wiki/Spuisofs#Dumping_EID2_Key_with_spuisofs)

    EID2 contains encrypted P-Block and S-Block. To get decrypted S-Block and P-Block first you have to decrypt EID2 with EID2 key and IV and then decrypt the blocks with DES-CBC. P-Block and S-Block DES-CBC IV and key:

    [Register or Login to view code]

    Writing P-Block
    • P-Block is stored in BD buffer 2.
    • BD buffer 2 is of size 0x60 bytes.
    • P-Block is in decryoted EID2 at offset 0x20 and of size 0x80.
    • Not all P-Block data is sent to BD drive. Only data starting at offset 0x10 and of size 0x60 bytes is written to BD drive buffer 2.


    [Register or Login to view code]

    Writing S-Block
    • S-Block is stored in BD buffer 3.
    • BD buffer 3 is of size 0x670 bytes.
    • S-Block is in decryoted EID2 at offset 0xa0 and of size 0x690.

    Writing New HRL to BD Drive

    HRL is stored in BD buffer 4. BD buffer 4 is of size 0x8000 bytes.

    [Register or Login to view code]

    • Tested on my PS3 Slim with OtherOS++.
    • You cannot just write a new HRL to BD drive buffer 4. First you have to send P-Block to BD drive, after that authenticate the BD drive and then write a new HRL. Only in this order will it work.

    [Register or Login to view code]

  6. #56
    bladerunner6 Guest
    is there an easy way to decrypt eid 2, 4 ?

    i got the encrypted dumps already

  7. #57
    pinoytechno Guest
    thanks for the info sir

  8. #58
    Foo Guest

    Fixing DRL and CRL Hashes Tutorial by Glevand

    Fixing DRL and CRL Hashes Tutorial by Glevand


    It's a small and easy guide (via ps3devwiki.com/wiki/Fixing_DRL_and_CRL_Hashes) how to fix your DRL/CRL issues on GameOS with PS3 Linux.


    You need my latest ps3dm tool with VTRM commands retrieve and store_with_update.

    ps3vuart-tools: gitorious.ps3dev.net/ps3linux/ps3vuart-tools

    DRL and CRL Hashes

    DRL and CRL SHA1 hashes are stored on VTRM FLASH region. First 20 bytes are SHA1 hash of DRL. Then following 20 bytes SHA1 hash of CRL.

    Read current DRL and CRL SHA1 hashes from FLASH using VTRM service:

    [Register or Login to view code]

    Write current DRL and CRL SHA1 hashes to FLASH using VTRM service:

    [Register or Login to view code]

    If you write wrong hashes intentionally then you won't be able to play BD movies and you will get the following message:

    [Register or Login to view code]

    How to get correct DRL and CRL hashes:

    [Register or Login to view code]

    • I intentionally wrote wrong DRL and CRL hashes with VTRM service store_with_update.
    • After that i couldn't play my BD movies on GameOS.
    • Then i wrote correct hashes again and BD playback is working again

  9. #59
    bladerunner6 Guest
    i can confirm this worked on non SS otheros++ fw,

    couldnt remember original disc. got casino royale drl files, wrote the hashes back from that, crl didnt need changing

  10. #60
    Odellot Guest
    Thanks for this!

Page 6 of 9 First ... 567 ... Last

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Log in