Hey there.

So... you use an ad blocker. That's cool. Sometimes we do too.

But without ad revenue, we wouldn't even be here. And we might not be here much longer.

Please disable your ad blocker and click to continue.

Page 2 of 2 First 12
  1. #11
    SagatPL Guest
    works on kmeaw 3.55? probably only 3.41... may use the PSX pad with autofire with usb-adapter?

  2. #12
    OGroteKoning Guest
    There is no special code to circumvent anything on the PS3 in order for this to work. It should work on any PS3 with any FW. All the code does is repeat the "enter" key of a USB keyboard or keypad. If a USB keyboard or keypad works on your PS3, then this should too.

  3. #13
    OGroteKoning Guest

    Grind B-Spec - Bob's Babysitter

    I got bored and played around with my Teensy 2.0 ++ again. And again, with Paul at PJRC's help, I managed to get the Teensy to order Bob around.

    Christiann got me thinking about B-Spec grinding and although I don't really care about getting my Bob (B-Spec drivers) to level 40, I thought there must be a way to use the Teensy to do some automatic grinding on my behalf should I want to do more grinding. So I decided to get Bob to the end of his career without me having to sit through every race and watch. This grinding thing can really become tedious and boring and in my opinion has no place in decent games. So this was just to get Bob to the end of his career and also to get the trophy that comes with it.

    For those interested, (and there are probably not a lot left that would use this), I will share the code.

    [Register or Login to view code]

    What this does, is repeat the ENTER and DOWN keystrokes on of a keypad on an alternate basis. (ENTER DOWN ENTER DOWN ENTER DOWN ... ETC)

    This does unfortunately NOT work that well with championships. It would work with the individual races within championships or if you want to do only one championship which might lasts maybe 90 mins. But if you want to grind for long hours, then don't select the whole championship!

    So after you programmed your board, go into B-Spec events and select a car and a race of your choice. After loading the track and setting up your car, start the race and plug in your Teensy. The Teensy will constantly tell Bob to "reduce pace", but if you have a fast enough car, this will not matter. At the end of the race, the teensy will do all the necessary keystrokes to start a new race and there you go (again and again and again ...)

    I also tested this on the A-spec races and as per the first post, this code will also enable you to do A-Spec grinding too.

    Hope this helps and have fun not doing the tedious bits!

  4. #14
    smurfercom Guest
    Hi first post, all i did was use a usb wireless kb and wedged a piece of paper to hold the enter key and just let it repeat. I grinded a spec this way using two rubberbands but eventually just quit playing the game. I'm at lvl 34 b spec 34 a spec have all the cars I want including the x2010 just got bored of the game itself.

  5. #15
    deba94 Guest

    Post Put Your Arduino to Good Use: GT5 B-Spec Grinding

    After seeing the interest people put into the GT5 A-Spec grinding with the Teensey boards, I thought I'd share my B-Spec grinding method done with the Arduino Uno (as a matter of fact, this works for A-Spec as well).

    NOTE: This will only work for the Arduino Uno (tested) and possibly the Arduino Mega 2560. The Uno and (if I recall correctly, the Mega 2560) differ(s) from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega8U2 programmed as a USB-to-serial converter. This allows the board to be seen as a HID by flashing the Atmega8U2 with a custom hex file.

    What you'll need:

    Arduino Uno (or Mega 2560) x1
    Usb cable x1
    Wire about an inch long and stripped on both ends x2

    Arduino IDE
    Flip Programmer (windows only)
    MacPorts & dfu-programmer ("sudo port install dfu-programmer") (mac only)
    dfu-programmer (grab it from your distro's repos) (linux only)
    My big-bag-o-fun

    Copy of GT5
    Red Bull x2010 (any version)

    Start off by uploading this sketch to your Arduino:

    [Register or Login to view code]

    Now, you'll need to throw your UNO into DFU mode. To do this, (while your Arduino is plugged into USB) use one of the short wires to bridge two points on the back of the board near the map of Italy (just below). With that in place (hold it down with tape if you'd like) use the other wire to bridge the the two points seen here:

    If done correctly, your UNO should now be in DFU mode. (Confirm this by checking the list of serial ports. The serial port for your board should no longer show up.)

    Now, flash the 8u2!

    Windows: Open flip, load the hex, select at90usb82 and flash away.
    OS X/Linux:

    [Register or Login to view code]

    Now unplug the board and plug it back in. Careful though! It'll start typing exactly 6 seconds after the board receives power. Open notepad/gedit/emacs or something.

    Go hook it up to the ps3! Fire up B-Spec and go to either Extreme Series > Dream car championship > second from the left (indy) (best for farming XP) or Extreme Series > Like the Wind (indy) (best for farming monies).

    The UNO will alternate between sending the "return" key and the "down" key, so you can simply walk away and come back whenever you want to collect your winnings.


    to A.McD and ant.b from the arduino forums for the base code.
    to Dean Camera for LUFA-lib.

Page 2 of 2 First 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Log in