Hey there.

So... you use an ad blocker. That's cool. Sometimes we do too.


But without ad revenue, we wouldn't even be here. And we might not be here much longer.

Please disable your ad blocker and click to continue.

Page 4 of 16 First ... 34514 ... Last
  1. #31
    abdoaly Guest

    Thumbs Up

    thanks for the guide.

  2. #32
    neo0912 Guest
    +rep for your guide.. is this possible to fix a brick ps3 (rsod) on 3.56 firmware?

    Sent from my iPhone using Tapatalk.

  3. #33
    daaf Guest
    i have ps3 cech 2504b 320gb its 3.60 in orginal by sony in the box, how can i downgrade to 3.55?

    please help me

  4. #34
    dunkler Guest
    I tried to downgrade my PS3 using external nand programmer, got both dumps (138412032 bytes) but Flow Rebuilder shows an error "Operation completed with errors, bad block(s) has been found" on both nands. Checked wiring, verified readed dump with programmer twice, no success. Any help much appreciated!

  5. #35
    mushy409 Guest
    Dunkler - sounds like you have some interferance on your data lines. Your soldered connections need to 100000% solid otherwise you will end up with random bad blocks & ECC errors.

    I hope to god you haven't erased your NAND? If not, completely remove your Infectus & start afresh with new wire etc.

  6. #36
    theinfinite Guest
    How do I create backups? The RAR files don't have a 256MB.bin. I personally don't have any backups of anything here.

  7. #37
    cfwprophet Guest
    Depends on which con you have. The NOR's only have 16MB the other files are stored on the hdd on a owen flash mounted partition (if im not wrong)

  8. #38
    theinfinite Guest
    I have the CECHA01 & it has two NANDs w/Samsung written on them. I think the motherboard is a COK-002 last time I checked.

  9. #39
    cfwprophet Guest
    Do you mean NAND backups ?And if yes do yo have a hardware flasher ?

  10. #40
    theinfinite Guest
    Yeah, NAND backups and I do have hardware flasher: the Progskeet v1.1 crystal blue edition, two 360 solderless clips, two PCB Adapters with the 32 pin ribbon cables for dual NAND flashing, the Teensy++, the JTAG, the Infectus 2 with its own programmer, 50 pin ribbon cable.

Page 4 of 16 First ... 34514 ... Last

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Log in