12-11-2008 #21aries2k6 Guest
I tried Micro Machines on Pgen on party mode because it supports multiple players but it wouldnīt accept the controllers. Iīm not sure if this is because of they way you have to reset the controller everytime you go into ps2mode.
Then again I donīt have the multitap so Iī, not sure if it supports multiple players even on the ps2
12-23-2008 #22cicerogyn Guest
I buy pen drive PNY 1GB Mini for ebay.com and I waiting. When it's arrive i post the results, thx.
12-28-2008 #23verysimple1 Guest
Awesome tutorial. Thx!
12-28-2008 #24boman265 Guest
thanks for the guide, it really helped me.
01-09-2009 #25jaydog13lt Guest
I shut it off for a while, added a few more roms to the drive and now they will not load up at all. I can find them but after I try to load them nothing happens. Im not sure what I did wrong. I will go over everything and post if I find a solution but does anyone else have this problem?
after redoing this whole process (using my psp so there are no usb pen drive compatability problems) i am now unable to start the snes emulator. the sega emulator works fine though. I have the latest firmware 2.53 with a 500gb hd. Im now going to reformat my drives, delete my virtual memory card and start over once again. this is frustrating me because I was able to play it the very 1st time. I just wanna play some mario kart lol
01-10-2009 #26aries2k6 Guest
This problem has happened to many users. I also had this problem along time ago. I think some files in the download package are corrupted.Iīm not exactly sure whatīs causing the problem but Iīm confident we can resolve it.
I donīt think the problem is the usb device especially the psp
1st, make sure you have the right snes elf. it should be the snes_usb 0.2.4 version. Now I really think the problem is file corruption. Delete the config.dat file that you have in the psxloader folder. Also delete the BOOT.IMG that is inside the B?DATA-SYSTEM folder. Restart psxloader, it will creat a new boot.img and confg.dat files. you will have to go to the select menu on psxloader and select the right options again for the 1st time you load the elfs.
Hopefully that fixed the problem. another thing that could be causing the corruption is the lack of an icon in the bedata folder. Iīm guessing you donīt have one and that folder shows up as corrupt data in the XMB? Iīm not sure if that causes corruption but I did have problems with both Guitarfun and keylauncher files getting corrupted. If your still having problems you might want to make a new vmc, backup the elfs you need and delete everything from you usb. download the easy psxloader setup package.
@EVERYBODY just starting out for the 1st time or having problems
Easy psxloader setup
The readme is included but here it is:
1.Copy these 3 folders to your pendrive.
Smboot0 is uLaunch.elf. Smboot2 is psxloader. The supplied usbd.irx is from Launch.elf 3.41
You still need to put the 3 ps2bios files(libsd, xmcman,xmcserv) inside the module folder for psxloader
2.Boot SwapMagic and start Smboot0(uLaunch). uLaunch uses the circle button to accept and the cross button to cancel.
Ok, once uLaunch boots up, go to FileBrowser and press circle.
Go to :mass and press circle. thatīs your usb device.
select the folder BADATA-SYSTEM(for USA ps3) or BEDATA-SYSTEM(Europe, pal ps3) and press R1.
The small option menu will pop-up. Select COPY.
Goto mc:0 and press circle to enter the memory card.
Press R1 again, select the option McPaste and press circle. This will copy the needed folder into the memory card.
you can delete it after from your pendrive. you only need it on the memcard.
Thatīs it. your ready for psxloader.
3. Restart Swapmagic and select SMBOOT2.
this will start psxloader. you should see the elfs that you have in the psxloader folder.
goto snes.elf and hit the SELECT button for the psxloader option menu.
option D for SNES and F for PGEN.
You can make folders on your usb to put the roms in. once youīve started the emulator you should be able to
select the roms from the pendrive. you can also put them on the memorycard.
thatīs about it. good luck.
This turned out to be a long post so Iīll be back in a bit with more ps2homebrew.
01-10-2009 #27adshead Guest
yea seen this on youtube a while back, gutted i haven't got a swap magic 3.6, but also on youtube theres a video that shows u can play psx and ps2 games on the 40gb model using this same method with swap magic, but i've got a 60gb so no worries there
01-10-2009 #28aries2k6 Guest
@adshead. good thing youīve got the 60gb because this method wonīt work on the 40gb model for ps2 games and definately not for psx games.
Thereīs a few topics about running emulators but they all talk about psxloader but thatīs not the only way to run emulators or ps2 homebrew. Psxloader is only needed if the app uses ps2 bios files that arenīt included in the ps2/ps3 bios. mainly the newer modules like the Xmodules.
You can load alot things directly by placing them in the SWAPMAGIC folder or by using a launcher aplication. Those of you who already had this running had used Launch.elf 3.41. You could use that app to launch elfs but itīs a little outdated. Iīve compiled uLaunch.elf 4.30 with working usb drivers. Itīs easier to use and has some extra functions.
Emulators you can use without psxloader
To use make a folder named CD inside the folder with the neogeo elf. You have to extract all the files from the game image(iso) and place inside the CD folder. You can delete the mp3.files because you cant use them. you also need the neogeo cd bios inside the folder with the elf file.
Wonderstation(wonderswan) emulator and the Vectrex (vecxps2) emulators
You can get these 3 emus here http://www.ps4news.com/forums/pc-gen...s-ps2-451.html
Although pvcs_reloaded(atari2600) was reported working with psxloader on the 60gb NTSC model it wasnīt working on ps3īs with only partial ps2 compatibilty.
Iīve recompiled a version (1.3) that works on all models. Thanks to hermes and Ifcaro for the idea of replacing with modules from the scene and thanks to Lukaz for the updated freesd.irx
This version doesnīt have usb support so you have to make a folder called ROMS on your vmc and place the roms there in .bin format. Check the list for the proper rom names. After starting the emu, navigate to the rom folder on the mc and quickly tap the X button to see the roms. if you hold the X button to long it will loop back to the mc root directory. You can also use the official BD remote as a controller with this emulator
Iīve also got the psms_reloaded (sega master-system) emulator working on the ps3. This one does have usb support so you can use that or the vmc. Since we canīt use the hdd on the ps3 I removed those drivers. Donīt try to open the hdd folder or the emulator will crash. You can also use the official BD remote as a controller with this emulator
Thatīs it for now. Iīve been busting my butt trying to get any ps2 port of Doom running on the ps3 but so far no luck.
01-19-2009 #29klngmaster Guest
excellent and thanks!
01-23-2009 #30r0kk0z80 Guest
Thanks!! helped me out a lot ^^