PS4 News on Facebook! PS4 News on Twitter! PS4 News on YouTube! PS4 News RSS Feed!

Home PS4 News - Latest PlayStation 4 and PS3 News

318w ago - This is a TUT to unbrick your Wii with the internal Rescue Menu. You can do this with and without Starfall.

Without Starfall you have to MOD a GC Controller to press all 4 ways of the digi pad to same time and you need a Original Game Disc with a update on it, higher as your installed FW. If you have a Modchip set to autoboot disc's than you can use a backup instead of a Original disc. For Starfall you dono need to MOD your GC Pad.

And you could use Backups if the disc size will match the 4,37GB. I self have testet the semi unbrick disc but it does not work without a modchip. There for I made the "Universal Unbrick Disc" becouse the disc will match the 4,37GB and it hase the FW 3.3 update + the WAD Manager as main.dol in the game partition.I will show you how to start both rescue menu's, with an without starfall and i will use the universal unbrick disc with starfall to upgrade (unbrick) my Wii to FW3.3.

When you could use it?

If you run into a brick and your Wii does not start the menu any more but will boot (green led and spinning drive) you have a good chance to be able to start the Wii internal rescue menu to install a FW update or the system menu.wad + IOS via WAD Manager what will unbrick your Wii if you lucky. If your Wii does not boot any more than your only chance will be Nintendo or a pre-dumped NAND image of your consoles flash chip.

Lets start with the normal Recue Menu Methode:

Open up your GC pad useing a triwing scruew driver.Before you open the pad turn around than open it.

http://img10.imageshack.us/img10/4836/p1803090436u.jpg
http://img15.imageshack.us/img15/228/p1603092118.jpg

Take the digi pad part of and in the center cut of the nipple.On my picture it will be allready cuted of.

http://img19.imageshack.us/img19/4870/p1603092122.jpg
http://img19.imageshack.us/img19/1810/p1603092119.jpg

Put all back together and connect it to port 4. The next step will be a little bit tricky. You need the correct timing to boot into
the Rescue Menu. Under FW 3.2 you will see nothing more than a blank black screen. On FW 3.2 and higher you will see a FW x.x down in the
right corner. Here a Vid of booting the Rescue Menu with normall method:




The Starfall Rescue Menu Methode:

To use this you must have installed the Starfall rescue menu hacks.Than just connect the GC pad to port 1 and press "Y" duoring bootup. Hier a Vid of it in action:




Unbrick your Wii:

Now we know both methodes i will go on and upgrade my CFW 3.2 Wii with my Universal Unbrick Disc to a FW 3.3 Wii.
Hier the Vid:




As you can see it hase not installed the update but started the WAD Manager.Even better becouse you could choose the wad you want to install!

My Universal Unbrick Disc will be set to autoboot and i forgot that this will disable the update and directly load the main.dol from the second partition.

This works on my Softmodded Wii with CFW and Starfall installed.It should also work with a Modchip (even with no autoboot seted) and no Starfall installed.

Anyway with the WAD Manager you will be secured but i want to find a IOS to set the partition to load what will be present on every Wii. Becouse last time i haved a wii without the IOS35 what the second partition of the uud will be load and i cant start the WAD Manager even the app reload the IOS249.

Before reloading IOS the IOS from the game partition must be present to be load into the ram.I will try it with IOS4 what will be the
update driver and present on every wii. If it works i will reupload the uud.

-Good Luck in Unbricking your Wii-

Guide: How to Unbrick Your Nintendo Wii Console

Stay tuned for more PS3 Hacks and PS3 CFW news, follow us on Twitter, Facebook and drop by the PS3 Hacks and PS3 Custom Firmware Forums for the latest PlayStation 3 scene and PlayStation 4 scene updates and fresh homebrew PS3 Downloads. Enjoy!


  • Sponsored Links




#71 - kamal1948 - 261w ago
kamal1948's Avatar
hi my friend i deleted my ios60 patched my wii have not a signal out.

please there is any way to fix it (i didn't install preload).

Thanks for any help.

#70 - Gargy81 - 268w ago
Gargy81's Avatar
Quote Originally Posted by dorienasder View Post

My guess is you installed a theme that was either not for your system menu version or your region. Too bad about the nand backup. Did you just install bootmii as IOS or also preloader? Have you tried following the instructions in the first post of this thread? Can you get into recovery mode? If you patched your system IOS (IOS70) at any point, you may be able to use cfwprophet's UUDv4 to install a new system menu, which would remove the bad theme.


So I get the original GC controller and mod it. I can get into recovery menu (4.2 (EUR)), but when I insert the UUD v.4 or LCUD v.3 it spins for a few seconds and the stops. after few second 4.2 (EUR) sign disaperas but not completely - it seems that it just dims and if you look real good, you can steel see it.

after upgrading my system to 4.2E I did the full soft-mod procedure (for playing from USB drive) with Trucha-bug restorer. I don't recall if I ever touched the ISO70.

So is there any chance to get my Wii back or is it dead completely?

Regards,
Gargy81

#69 - JosianXP - 270w ago
JosianXP's Avatar
Genious, I just want to Thank You. I havent bricked my WII, But this its Good News, i'm not the type of person to mess much with the wii anyways.

#68 - talenat - 270w ago
talenat's Avatar
I have 2 bricked wii.. 1 is modchip with secound is softchip My first modhchip wii have wiidrivekey. I have original SAVEMii hardware.

please help me how i can fix my Wii's 3.4 (EUR) PAL version consoles?

#67 - dorienasder - 273w ago
dorienasder's Avatar
Quote Originally Posted by nornigold View Post
Hi, i have got the firmware up on the bottom right but after putting in the disc then uudv4 then noting happens. do i have to put anything in on the SD drive 1st as above? many thanks, please help!


You don't need anything on the SD card for UUDv4. Homebrew discs need a system IOS with the trucha bug to boot. So if you only have a drivechip and updated to official 4.2 firmware, you can't use it.

Since you don't have homebrew channel, you probably don't have bootmii or preloader either. That severely limits your unbrick options.

What drivechip do you have? Has it autoboot enabled, can you insert a game disc instead of UUDv4 and play it?

Quote Originally Posted by Gargy81 View Post
I tried to install a difrent menu theme (from white to black) and now my Wii is bricked. Everything was fine, I restarted the Wii and now all I have is black screen.

My FW is 4.2, moded with chip (I think Wiikey v2), I installed Bootmii (as IOS) and I erased my NAND backup from PC (formatted the wrong HDD).


My guess is you installed a theme that was either not for your system menu version or your region. Too bad about the nand backup. Did you just install bootmii as IOS or also preloader? Have you tried following the instructions in the first post of this thread? Can you get into recovery mode? If you patched your system IOS (IOS70) at any point, you may be able to use cfwprophet's UUDv4 to install a new system menu, which would remove the bad theme.

#66 - nornigold - 273w ago
nornigold's Avatar
Hi, i have got the firmware up on the bottom right but after putting in the disc then uudv4 then noting happens. do i have to put anything in on the SD drive 1st as above? many thanks, please help!

#65 - nornigold - 273w ago
nornigold's Avatar
Hi and thanks for your great forum! Maybe i still have some hope. My sons wii is bricked and has only got a black screen on turning on. The drive lights yellow briefly then goes off. It has a hardware mod chip installed but no homebrew channel. I find a lot of the stuff ive been reading confusing but getting a small understanding.I have modded a GC controller but can not see the video on when to push the buttons due to internet censorship in my country.

After reading the above post is it possible to install the home brew off SD card?? Can you be more specific in when to push the GC button? Many thanks in advance.

#64 - Gargy81 - 273w ago
Gargy81's Avatar
Hi!

I have a problem with my brick (former known as Nintendo Wii).

I tried to install a difrent menu theme (from white to black) and now my Wii is bricked. Everything was fine, I restarted the Wii and now all I have is black screen.

My FW is 4.2, moded with chip (I think Wiikey v2), I installed Bootmii (as IOS) and I erased my NAND backup from PC (formatted the wrong HDD).

Is there any chance to get my Wii back to life?

Thank you and regards,
Gargy81

#63 - cfwprophet - 274w ago
cfwprophet's Avatar
In the SuperMario Thread you will find NeoGamma Beta15 and we have a owen SD/USB-Loader Thread

#62 - soxaholic77 - 274w ago
soxaholic77's Avatar
Quote Originally Posted by cfwprophet View Post
You can get the files on your PC with the Tool NUSD (Nintendo Update Server Downloader) or just hunt for it on the Web.A other possability would be to wait becouse i also have planed to release a Wii File Thread.In case that Nintendo puts more and more stub version of IOS on the server i decided to puplically release my collection of System Menu and System IOS's.

For cboot2 i also will say to you just wait a little bit.In the next hours i release the new RescueMii-COREv17 wich will also contain the bootmii folder and the cboot2v16.

Just download the pack take the cboot2 folder, place it onto your SD card and rename it to bootmii.Put it in in your Wii and fire it up the whole thing. (means just to boot your Wii ).

The programm automatic calls the next available IOS and patch it in RAM with the modules and hacks from the cIOS249v16.After that automatic progress you will be presented with a Special WAD Manager running in a special MODE.And as i sayed you simply reinstall your system menu for your region but before do your self a favore and install all the RescueMii-COREv17.Then you do not need to install a system ios for your SM.Just the correct system menu and thats it.

You are the best man!! now i just need to redo the softmod and i'm back to playing backups!!! thanks so much!!

i can't find the backup channel now... what can i do to play backups now?

 











Advertising - Affiliates - Contact Us - PS4 Downloads - PS4 Forums - Privacy Statement - Site Rules - Top - © 2015 PlayStation 4 News